Sprint Nextel 550 manual Click Finish and repeat steps 1 to 4 as prompted

of launching the software by double clicking an icon on your desktop (as well as from the Start menu).

▶Click Finish to close the last screen of the wizard.

▶If you are running Windows XP, a window indicates that the driver files will be copied to your notebook. Click OK and click Continue Anyway on the Software Installation window each time it appears. A window prompts you to insert the PCS Connection Card to install the drivers. Click OK.

Installing the PCS Connection Card driver.

1.Attach the antenna to the PCS Connection Card and, with the label facing up, carefully insert the card into your PC Card slot. Windows should detect that a new device has been inserted and launch the wizard that guides you through the driver installation.

2.Select Install from a list or specific location (Advanced) on the

first window of the Found New Hardware Wizard and click Next to proceed.

3.Select the Search for the best driver in these locations radio button, and the Include this location in the search check box,

then enter d:\Drivers\WinXP where d is the drive letter of your CD-ROM drive. Click Next to proceed to the next window.

4.If a warning appears stating that PCS Connection Card has not passed Windows Logo testing, click Continue Anyway.

5.Click Finish and repeat steps 1 to 4 as prompted.

6.Click OK when prompted that the card has been successfully installed.

On completion of this step, the PCS Connection Manager Software and the PCS Connection Card driver are installed and you can proceed to activate your card. See “Activating Your PCS Connection Card” on page 24.

Tip: A driver is software that forms the interface between a device (such as the PCS Connection Card) and the operating system on your PC (such as Windows XP).

Section 2: Installing the PCS Connection Card

22 2A: Installation on Notebook PCs