Sprint Nextel 550 manual Outgoing Calls, Click the Talk button

Outgoing Calls

To initiate a call:

1.Connect a headset to the card, if one is not already connected.

2.If the keypad is not displayed, then:

Notebook / Handheld PC: click the keypad button.

Pocket PC: tap Tools > Voice Call.

3.Enter the number you want to dial by either clicking the number buttons on the keypad or typing the numbers on your keyboard.

4.Click the TALK button.

Note: You cannot make a phone call when there is an active PCS Vision connection. You can make phone calls during dormant PCS Vision connections. For information on dormancy, see page 52.

Tip: If you click the TALK button without entering a number, the card redials the last number you dialed.

If you are roaming and Call Guard is enabled (page 88), the card beeps and a screen appears stating that a roaming rate applies.

As the call is being dialed, the PCS Connection Manager displays “Dialing” and the phone number.

Once the call is answered, “In Use” is displayed.

You can also dial a number from the Phone Book (see page 67 for notebook PCs and page 70 for Handheld/Pocket PCs) and from the Call Log (see page 71).

Section 3: Using the PCS Connection Card

3C: Voice Connections 59