Sprint Nextel 550 To download the software to the Handheld/Pocket PC, Pocket PCs, Handheld PCs

▶Using the default settings for the Destination Location and Program Folder is recommended unless you have special requirements and an advanced understanding of PC configuration. (The Destination Location dictates where the software is installed. The Program Folder dictates the name assigned to the software in the Add/Remove Programs in the Control Panel.)

▶A dialog box displays this message, “On the next mobile device connection, the installed application will be downloaded to the device.” Click OK.

▶A check box allows you to choose to display release notes. The release notes list known issues in the software and are displayed in the Windows Notepad. (If you choose to display them, when you are finished reading, use the close box in the upper right corner of the window to close the Notepad.)

▶Click Finish to close the last screen of the wizard.

▶Use the exit option in the lower left corner of the window to close the CD start-up menu.

Downloading the Software to the Handheld/Pocket PC

To download the software to the Handheld/Pocket PC:

1.Connect the Handheld/Pocket PC to the host in one of these ways:

Pocket PCs:

▶Connect one end of the serial cable to the bottom of the Pocket PC and the other end to a serial port on your host PC, or

▶Place your Pocket PC in its cradle and connect the USB cable on the cradle to a USB port on your host PC, or

▶Align the infrared port on your Pocket PC with an infrared port on your host PC.

Handheld PCs:

▶Place your Handheld PC in its docking cradle and connect the serial cable on the cradle to a serial port on your host PC, or

▶Align the infrared port on your Handheld PC with an infrared port on your host PC.

Section 2: Installing the PCS Connection Card

2B: Installation on Handheld and Pocket PCs 31