Installing the PCS Connection ManagerSM Software

To install the software, you can either:

Connect the host and the Handheld/Pocket PC before you install the software to the host. (In this case, you are prompted to initiate the download as soon as the software installation is complete.)

or –

Install the software to the host and then connect the host and the Handheld/Pocket PC, as described here.

This process installs the PCS Connection Manager Software and the PCS Connection Card drivers.

Installing the PCS Connection Manager Software on the Host

To install the software on the host:

1.Close any Windows programs that are running and insert the PCS Connection Manager installation CD in your CD-ROM drive. The CD should auto-start and display a menu.

2.If the CD does not auto-start, select Start > Run and enter d:\launch.exe where d is the drive letter of your CD-ROM drive.

3.From the CD start-up window, select:

Pocket PC installation and documentation then Pocket PC

software installation (if you have a Pocket PC running

Windows CE 3.0 MS Pocket PC), or

Pocket PC 2002 installation and documentation then

Pocket PC 2002 software installation (if you have a Pocket PC

running Windows CE 3.0 Pocket PC 2002), or

Handheld PC 2000 installation and documentation then Handheld PC 2000 software installation (if you have a

Handheld PC running Windows CE 3.0)

This launches the InstallShield® Wizard that installs the software to the host.

4.Use the Next and Back buttons to navigate through the wizard noting the following:

You must indicate your acceptance of the terms of the license agreement by clicking Yes to proceed with the installation.

Section 2: Installing the PCS Connection Card

30 2B: Installation on Handheld and Pocket PCs

Page 36
Image 36
Sprint Nextel 550 manual Installing the PCS Connection ManagerSM Software, To install the software, you can either