Sprint Nextel 550 manual Before you can use your PCS Connection Card, you must first

Getting Started

Before you can use your PCS Connection Card, you must first:

1.Install the PCS Connection Manager Software, located on the Installation CD, onto your computer.

Note: Before installing your new software, delete or uninstall any previously existing modem or dialer software from your system.

Note: Do not insert the PCS Connection Card in the slot until prompted to do so by the Setup program.

2.Insert the card into your computer’s PC Card slot (Sprint label facing up). Windows will detect the card and automatically install the necessary card drivers.

3.Launch the PCS Connection Manager Software application.

4.If your card has not previously been activated, the Activation Wizard will automatically launch and guide you through the process.

System Requirements

The PCS Connection Card is supported on the following operation systems:

▶Windows 98 SE

▶Windows 2000 with Service Pack 1

▶Windows Me

▶Windows XP (Home and Professional versions)

Section 2: Installing the PCS Connection Card

18 2A: Installation on Notebook PCs