Sprint Nextel 550 manual Resolving Resource Conflicts

Installing the Windows XP PCS Connection Card Driver

1.If the installation CD is not already in your CD-ROM drive, insert it. If the CD start-up menu appears, use the exit option in the lower left corner of the screen to exit the menu.

2.Eject and reinsert the PCS Connection Card to launch the Found New Hardware Wizard.

3.Select Install from a list or specific location (Advanced) on the

first window of the Found New Hardware Wizard and click Next to proceed.

4.Select the Search for the best driver in these locations radio button, and the Include this location in the search check box,

then enter d:\Drivers\WinXP where d is the drive letter of your CD-ROM drive. Click Next to proceed to the next window.

5.If a warning appears stating that PCS Connection Card has not passed Windows Logo testing, click Continue Anyway.

6.Click Finish and repeat steps 1 to 5 as prompted.

The correct driver is then installed.

Resolving Resource Conflicts

Note: You require your PCS Connection Card installation CD to complete this procedure.

The PCS Connection Card requires these system resources:

▶1 IRQ

▶40 bytes of I/O space

▶1 communications port

If these resources are not available to the card, you have a resource conflict. If another PC Card is installed, you may be able to free the necessary resources simply by ejecting the other card. Otherwise, you may need to disable another device (such as an internal modem, infrared device, or network card) to resolve the resource conflict. This section explains how to disable other devices.

Section 3: Using the PCS Connection Card

3F: Troubleshooting Tips (Notebook PC) 107