3.Press MENU (Base) and then or to select a desired device when necessary.
NOTE
For the cellular device that is not connected:
4.Press MENU (Base) and then or to select
CONNECT or REMOVE.
If you select CONNECT:
5.Press MENU (Base) and the telephone starts to connect the selected cellular device.
If you select REMOVE:
5.Press MENU (Base) and the corded base displays
REMOVED.
NOTE
For the connected cellular device:
4.Press MENU (Base) and the corded base displays
REMOVED.
NOTES
•If the device(s) is (are) connected, the
corresponding or will be displayed. Otherwise, only the will be displayed.
•Even though the active device is removed from the active devices list, it is still on the paired devices list.
3.5Phonebook transfer
The telephone system can receive phonebook entries sent from your Bluetooth enabled mobile phone which is paired up and connected to the base unit.
Phonebook transfer operates only when the telephone system is in idle mode.
When receiving entries from a Bluetooth enabled mobile phone, the corded base will display ####
RECEIVING PB... (#### refers to the counter for the number of entries downloaded), and then #### PB RECEIVED (####
refers to the total number of entries downloaded successfully) after phonebook transfer is completed.
NOTES
•After the phonebook transfer is completed, all received entries will be stored into the phonebook list like the phonebook entries created in the telephone system.
•If the phonebook capacity is full during the transferring process, the phonebook transfer will be ended automatically. The corded base will display
MEMORY FULL, and then #### PB RECEIVED (#### refers
to the total number of entries downloaded successfully).
BLUETOOTH® | 25 |
|
|