If you select ADD TO ACTIVE:
Press MENU and display shows DEVICE ADDED TO ACTIVE LIST, and then the telephone will start to connect the selected cellular device.
If you select REMOVE PAIRED:
Follow the steps above.
For an inactive device (not shown in the active devices list) when there is no free slot in the active devices list (already two active devices):
5. Press MENU and then VOL+ or REDIAL/VOL- to
select REPLACE ACTIVE or REMOVE PAIRED. If you select REPLACE ACTIVE:
6.Press MENU and then VOL+ or REDIAL/VOL- to select a device on the active devices list to be replaced.
7.Press MENU and display shows DEVICE ADDED TO ACTIVE LIST, and then the telephone will start to connect the selected cellular device.
If you select REMOVE PAIRED:
Follow the steps above.
NOTES
•When the connected cellular is removed, the corresponding 
or 
will be off.
•When the disconnected cellular is connected, the corresponding 
or 
will be on.
•When the cellular is removed, the device name will be removed and EMPTY will be displayed instead in the paired devices list.
5.2.2Replacing a paired device
If you have already paired up four Bluetooth enabled mobile devices, you will need to replace one of them if you would like to pair up another device. Follow the steps below to replace and pair up a new device.
1.Press MENU and then VOL+ or REDIAL/VOL- to
select BLUETOOTH.
2.Press MENU and then VOL+ or REDIAL/VOL- to
select SETUP CELLULAR.
3.Display will show MAXIMUM OF 4 PAIRED DEVICES, and then REPLACE A PAIRED DEVICE?.
4.Press MENU to confirm. Display will show the four Cellular names of the paired devices.
5.Press VOL+ or REDIAL/VOL- to select the cellular device you would like to replace.
42 | BLUETOOTH® |
|
|