6.Press MENU to confirm. Display will show DEVICE
REMOVED FROM PAIRED LIST, and then CELLULAR READY?.
7.Refer to section 5.1 to proceed with the next steps.
NOTE
When pairing a new cellular, the connected cellular will be disabled temporarily.
5.3Active devices
Only devices on the active devices list can establish a Bluetooth connection with the telephone base. Although two paired devices can be connected to the telephone base, only one Bluetooth mobile phone can be on a call at a time.
NOTE
When adding, removing, or replacing a Bluetooth enabled mobile device on the active devices list, all connected devices will be disabled temporarily until the procedure is completed.
5.3.1Adding an active device
You can have a maximum of two devices on the active devices list.
1.Press MENU and then VOL+ or REDIAL/VOL- to
select BLUETOOTH.
2.Press MENU and then VOL+ or REDIAL/VOL- to
select ACTIVE LIST.
3.Press MENU and then VOL+ or REDIAL/VOL- to select an empty position.
4.Press MENU. The display will show ADD PAIRED
DEVICE?.
NOTE
Display will show NO PAIRED DEVICE if there is no device paired up.
If one paired device has already been set as an active device and shown in the active devices list, the display
will show PLEASE PAIR MORE DEVICES.
5.Press MENU and then VOL+ or REDIAL/VOL- to select a desired device from the paired devices list.
6.Press MENU. The handset displays DEVICE ADDED TO ACTIVE LIST and then starts to connect the selected cellular device.
7.Depending on your mobile phone settings, you may need to press a key on your mobile phone to confirm the connection. When you successfully add and connect an active device, the handset displays CONNECTED. Then the cellular name will be displayed in the active devices list.
BLUETOOTH® | 43 |
|
|