1.Press MENU.
2.Press VOL+ or REDIAL/VOL- to scroll through the menu.
3.Press MENU for opening
4.Press 
/BACK to go back to the previous menu level or cancel an action.
If you do not press any button on the handset for 30 seconds, the display will automatically return to standby. It will also return to standby when the handset is placed on the base or charger.
4.14Intercom
This feature is only available when there are at least two registered handsets. It allows you to make internal calls, transfer external calls from one handset to another handset, and use the conference option.
4.14.1 Calling another handset
1.Press INT. Except for the originating handset, all registered handsets will be displayed in the list.
2.Press VOL+ or REDIAL/VOL- to select the handset you want to call.
3.Press MENU to call the handset.
4.Press 
/BACK to hang up.
NOTE
If the handset is not within the valid operation range, this function may not be available. During an intercom call, you will hear an alert tone if there is an incoming
external call. You need to press 
/BACK to hang up the intercom call before answering the incoming external call.
4.14.2Transferring a call to another handset
1. During an external call, press INT.
- Your call is put on hold.
2. Press VOL+ or REDIAL/VOL- to select the handset you want to call.
3. Press MENU to call the handset.
4. When the other handset answers by pressing 
/
FLASH or 
/SPEAKER, press 
/BACK to transfer the call. If the other handset does not answer, press 
/MUTE to talk to your caller again.
4.14.3Three-party conference call
1.During an external call, press INT. - Your caller is put on hold.
2.Press VOL+ or REDIAL/VOL- to select the handset you want to call.
3.Press MENU to call the handset.
Using the phone | 33 |
|
|