4.When the other handset answers by pressing / FLASH or /SPEAKER or the wireless headset
answers by pressing | , press /BACK to transfer |
the call. If the other handset or the wireless headset | |
does not answer, press | /MUTE to talk to your caller |
again. |
|
NOTE
You are not allowed to use the wireless headset to initiate an intercom call.
To transfer the call from handset to wireless headset, you
can also press on the headset to join the call, and then hang up the call on handset.
3.14.3Three-party conference call
1.During an external call, press INT. - Your caller is put on hold.
2.Press VOL+ or REDIAL/VOL- to select the handset or the wireless headset you want to call.
3.Press MENU to call the handset or the wireless headset.
4.When the other handset or the wireless headset answers the intercom call, press MENU on the calling handset to set up the conference call.
24
5.Press /BACK on any handset to end a
headset engaged with the caller or press on the wireless headset to hang up and leave the other handset engaged with the caller.
NOTE |
|
|
During an external call, pressing /FLASH or | / | |
SPEAKER on any handset, or pressing | on the wireless |
headset will join in the call and set up a conference call.
3.15Setting the dial mode
The default dialing mode is suitable for your country and network operator. It is unlikely that you should need to change this setting unless advised to do so.
1.Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP BS.
2.Press MENU to select DIAL MODE.
3.Press MENU and VOL+ or REDIAL/VOL- to select TONE
or PULSE.
4.Press MENU to save.
Using the Phone