NOTE
If the pulse mode is selected, press TONE/* to switch from pulse to tone dialing temporarily when dialing out. After the call is ended, the dial mode will change back to pulse.
3.16Setting the flash time
The default flash time is 600MS. It is unlikely that you should need to change this setting unless advised to do so.
1.Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP BS.
2.Press MENU and then VOL+ or REDIAL/VOL- to select
FLASH TIME.
3.Press MENU and then VOL+ or REDIAL/VOL- to the flash time you want. (8 options are available: 90, 100, 110,
250, 300, 400, 600 and 700MS)
4.Press MENU to save.
3.17Setting the area code
1.Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP BS.
2.Press MENU and then VOL+ or REDIAL/VOL- to select
AREA CODE.
Using the Phone
3.Press MENU and enter the area code.
4.Press MENU to save.
3.18Registration
3.18.1 Registering a handset
Up to 5 handsets or wireless headsets can be registered to one base. The original handset is
To register an additional handset,
1.Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP HS.
2.Press MENU and then VOL+ or REDIAL/VOL- to select
REGISTRATION.
3.Press MENU and then VOL+ or REDIAL/VOL- to select
YES or NO.
4.Select YES and press MENU to enter the registration procedure as follows:
1.Press and hold FIND for 4 seconds on the base.
2.Place the unregistered cordless handset on the base or charger.
25