Press the following keys on your another phone to perform the following functions, after entering your remote access mode.
Press... To...
1Repeat the message
2Play/Stop the current message playback
3Skip forward to the next message
4Toggle Answer Off/Announce Only/Announce and Record modes
7Listen to the Main Menu (for full voice prompts only)
0Delete the message
3.21.10 Setting the security code
This is used to change the remote access PIN if necessary.
1.Press MENU and then VOL+ or REDIAL/VOL- to select
ANSWER MACHINE.
2.Press MENU and then VOL+ or REDIAL/VOL- to select
SECURITY CODE.
3.Press MENU and then enter the
4.Press MENU to save.
32
4. Help
The icon is not scrolling when the handset is placed on the base
•Handset not properly seated on the base cradle - readjust the handset on the base.
•Dirty contact - clean the charge contacts by wiping with an alcohol moistened cloth.
•Battery is full - charging is not necessary at this time.
No dial tone
•If there is no base power, check the connections. Reset the phone by unplugging then plugging it back into an electrical outlet.
•If the handset batteries are empty, recharge the battery pack for at least 24 hours.
•Move the handset closer to the base.
•Be sure to use only the provided telephone cords.
Poor audio quality
•If the base is too close to electrical appliances, reinforced concrete walls, or metal door frames, move the base from these areas.
Help