Connecting the base | Install and charge the handset battery pack |
1.Plug the power adapter with smaller pin plug & telephone line cord into the base. Power adapter with bigger pin plug is for charger (for
2.Plug the other end of the power adapter & telephone line cord into the wall jack.
3.Always use the telephone line cord provided in the box.
4.Use only the provided power adapter.
1.Slide out the battery compartment cover.
2.Place the supplied rechargeable battery pack in the battery compartment, with the battery connector plugged in, as shown.
3.Slide the battery compartment cover back.
4.Put the handset on the base to charge for at least 24 hours. The will indicate when the handset is fully charged.
5.Use only the rechargeable battery pack provided.
Getting started | 7 |
|
|