Topcom 5500 manual Games, Troubleshooting, Technical Data, Standard, Access Profile

Topcom Butler 5500

11 GAMES

The Butler 5500 has 5 games:

•Press MENU then scroll to Games and press OK.

•Select a game and press OK. Press START to display the game menu which includes instructions.

•Press BACK to exit.

12 TROUBLESHOOTING

Symptom		Possible cause	Solution
No display		Batteries uncharged	Check the position of the batteries
			Recharge the batteries
		Handset turned OFF	Turn ON the handset
No tone		Telephone cord badly connected	Check the telephone cord connection
		The line is occupied by another handset	Wait until the other handset hangs up
The icon	flashes	Handset out of range	Bring the handset closer to the base
		The base has no power supply	Check the mains connection to the base
		The handset is not registered on the	Register the handset on the base
		base
Base or handset do not ring		The ringing volume is zero or low	Adjust the ringing volume
Tone is good, but there is no		The dialling mode is wrong	Adjust the dialling mode (pulse/tone)
communication
Not possible to transfer a call on PABX		The FLASH time is too short	Set the unit to Long Flash time
Telephone does not react to pressing the		Manipulation error	Remove the batteries and put them back
keys			in place

13 TECHNICAL DATA

•	Standard:	DECT (Digital Enhanced Cordless Telecommunications)GAP (Generic
		Access Profile)
•	Frequency range:	1880 MHZ to 1900 MHz
•	Number of channels:	120 duplex channels
•	Modulation:	GFSK
•	Speech coding:	32 kbit/s
•	Emission power:	10 mW (average power per channel)
•	Range:	300 m in open space /50 m maximum inhouse
•	Numbr of handsets:	Up to 5
•	Powersupply base	230V / 50 Hz / 35 mA 6,5V DC 180mA & 150mA Model: SD35-405
•	Handset Batteries:	2 rechargeable batteries AAA, NiMh 750mAh 1,2V
•	Handset autonomy:	100 hours in standby
•	Talk time:	10 hours
•	Charging time:	6-8 hours
• Normal conditions of use:		+5 ˚C to +45 ˚C
•	Dialling mode:	Pulse / Tone
•	Flash time	100 or 250 ms

Topcom Butler 5500 23