Topcom 2820 Calling a Memory Number, Mute Function, Setting the Volume, Paging, Flash Button R

Topcom Butler 2820

5.5 CALLING A MEMORY NUMBER

•Press the Memory button , followed by the number of the memory location (0-9).

•Press the Line button . The memory number will be dialled automatically.

•Press the Line button when you want to terminate the call.

5.6 MUTE FUNCTION

It is possible to deactivate the microphone during a conversation. Now you can speak openly without being heard by your correspondent.

•Press the Mute button during a conversation. The microphone will be deactivated. The MUTE symbol . appears on the display.

•Press the Mute button again when you want to continue the conversation.

5.7 SETTING THE VOLUME

During a conversation you can set the volume by pressing the Volume button . You can set the volume alternatively in Hi, Medium and Low.

Note: The hands free receiver volume is also adjustable as above described!

5.8 PAGING

When you press the Paging button on the base unit, the handset emits a ringing signal for 20 seconds. This signal helps you find a lost handset. Press any key to stop the ringing on a handset.

5.9 OUT OF RANGE WARNING

When the handset is out of the working range of the base unit during a conversation, the unit will emit a warning signal to warn the user that he has to move closer towards the base unit.

5.10 FLASH BUTTON (R)

When you press the R button, also called flash or recall, the unit generates a line interruption (of 100 ms or 250 ms). It gives you the possibility to use the special services of your telephone provider and/or to transfer calls when you have a telephone exchange.

5.10.1 Setting the Flash time

•Press and hold the redial button for 3 sec.

•The display will show: ‘S’ for 100ms

or ‘L’ for 250ms

•The flash time setting will disappear after 2 sec. from the display

Caution: The base flash time is different from the handset flash time. To set the base flash time, please refer to § 9.5.

5.11 SETTING THE RING VOLUME AND MELODY

5.11.1 Handset melody

•Press and hold the melody button until the current melody is heard.

•Select the desired melody (1-9) by means of the scroll keys or by entering a number (1 - 9).

•Press again to confirm the setting

5.11.2 Handset ring volume

•Press the volume button in standby

•The handset will ring in the current volume

•Press 1-5 or use the scroll keys to select the desired volume

•Press ’0’ to turn the volume OFF

Remark: You can turn the ringer volume of each individual handset ON or OFF by simply press and hold

the key in standby.

10 Topcom Butler 2820