Topcom 2820 user manual Topcom Warranty

Page 14

Topcom Butler 2820

To set the handset dial mode please look at §5.13.

9.4 TRANSFER A CALL FROM BASE TO HANDSET

During base handsfree conversation you can transfer the call to any registered handset by

pressing the paging key . The line indicator LED will start to blink.

You can take over the line by any registered handset when pressing the line-key .

Or press the paging key again if you don’t want to transfer the call

Note: The handsets will not ring during transfer!!

9.5 SETTING THE BASE FLASH TIME

You can set the base flash time by the switch at the bottom of the base. You can set it in 100ms or 300ms.

Note: The base flash time is different from the handset flash time. To set the handset flash time, please refer to §5.10.1.

10. TOPCOM WARRANTY

10.1 WARRANTY PERIOD

The Topcom units have a 24-month warranty period. The warranty period starts on the day the new unit is purchased. The warranty on batteries is limited to 6 months after purchase. Consumables or defects causing a negligible effect on operation or value of the equipment are not covered.

The warranty has to be proven by presentation of the original purchase receipt, on which the date of purchase and the unit-model are indicated.

10.2 WARRANTY HANDLING

A faulty unit needs to be returned to a Topcom service centre including a valid purchase note.

If the unit develops a fault during the warranty period, Topcom or its officially appointed service centre will repair any defects caused by material or manufacturing faults free of charge.

Topcom will at its discretion fulfil its warranty obligations by either repairing or exchanging the faulty units or parts of the faulty units. In case of replacement, colour and model can be different from the original purchased unit.

The initial purchase date shall determine the start of the warranty period. The warranty period is not extended if the unit is exchanged or repaired by Topcom or its appointed service centres.

10.3 WARRANTY EXCLUSIONS

Damage or defects caused by incorrect treatment or operation and damage resulting from use of non-original parts or accessories not recommended by Topcom are not covered by the warranty.

Topcom cordless phones are designed to work with rechargeable batteries only. The damage caused by the use of non-rechargeable batteries is not covered under warranty.

The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor any damage caused during transportation.

No warranty can be claimed if the serial number on the units has been changed, removed or rendered illegible.

Any warranty claims will be invalid if the unit has been repaired, altered or modified by the buyer or by unqualified, non- officially appointed Topcom service centres.

14

Topcom Butler 2820

Image 14
Contents Butler 2820/TWIN/TRIPLE Belangrijk Topcom Warranty Buttons Display InstallationBattery LOW Indication Handset Operation Troubleshooting Technical Data Default Settings HandsetM H Safety InstructionsCleaning Buttons 17 18 10 1319P Tone/pulse switch Flash time switch Basestation InstallationDisplay Handset Battery LOW IndicationHandset Charger Units only TWIN/TRIPLE Version Incoming Calls Handset OperationOutgoing Calls ACTIVATE/DEACTIVATE Hands Free FunctionCalling a Memory Number Setting the VolumeSetting the Ring Volume and Melody Mute FunctionCALLER-ID Function Clip Store a Number from the Call LOG Into the Memory REGISTER/DE-REGISTER a HandsetErasing a Number from the Call List Register to a Topcom B2800/2820 BaseCall Transfer and Intercom Between TWO Handsets Base Telephone OperationTopcom Warranty Default Settings Handset TroubleshootingTechnical Data Nummerweergave CLIP-CALLER ID TOETSEN/LED Display InstallatieBatterij Leeg Indicator Werking Handset AANMELDEN/AFMELDEN VAN EEN HandsetVeiligheidsvoorschriften ReinigenTOETSEN/LED 19P Toon/Puls schakelaar Flash tijd schakelaar Installatie BasisBatterij Leeg Indicator Handset Lader Enkel in TWIN/TRIPLE VersieInkomende Oproepen Werking HandsetUitgaande Gesprekken HANDENVRIJ-FUNCTIE AAN-/UITSCHAKELENEEN Geheugennummer Oproepen Volume RegelenHET Belvolume EN DE Beltoon Instellen Tijdelijke Uitschakeling VAN DE Microfoon MuteDE Kiesmodus Instellen Nummerweergave CLIP-CALLER IDToetsenbord Blokkeren Nieuwe OproepenTelefoonnummers UIT DE Oproeplijst Wissen AANMELDEN/AFMELDEN VAN EEN HandsetOproepen VAN EEN Nummer UIT DE Oproeplijst Nummer UIT DE Oproeplijst in HET Geheugen OpslaanInterne Oproep Intercom Basisstation TelefoonHandset Verwijderen Afmelden TelefonerenGarantie Fabrieksinstellingen Handset Problemen VerhelpenTechnische Gegevens Enregistrer / Annuler UN Combiné Touches Ecran InstallationAffichage DU Numéro CLIP-CALLER ID Transfert D’APPEL ET Intercom Entre LES Deux CombinésConsignes DE Sécurité EntretienTouches Combiné Base19P Commutateur tonalité/impulsion Commutateur temps Flash Ecran BaseCombiné Indication DE Niveau Faible DES PilesChargeur Uniquement B2820 TWIN/TRIPLE Appels Entrants Fonctionnement DU CombinéAppels Sortants ACTIVER/DÉSACTIVER LA Fonction MAINS-LIBRES11 Régler LE Volume DE Sonnerie ET LA Mélodie Régler LE VolumeSignal D’AVERTISSEMENT HORS-PORTÉE Appeler UN Numéro MémoireVerrouillage DU Clavier Reglage DU Mode DE Composition DES NumerosAffichage DU Numéro CLIP-CALLER ID Nouveaux AppelsEffacer DES Numéros DE Téléphone DE LA Liste D’APPELS Enregistrer / Annuler UN CombinéAppeler UN Numéro DE LA Liste D’APPELS Enregistrer UN Numéro DE LA Liste D’APPELS Dans LA MémoireDésinscrire UN Combiné Transfert D’APPEL ET Intercom Entre LES Deux CombinésUtilisation DU Télépone PAR Base Appel Interne IntercomTransférer UN Appel DE LA Base AU Combiné Régler LE Volume DU HAUT-PARLEURRégler LE Mode DE Numérotation DE LA Base Régler LE Temps Flash DE LA BaseParamètres PAR Défaut 11. Résolution DE ProblèmesDonnées Techniques Batteriefüllstandsanzeige Betrieb Handset TASTEN/LED Display InstallationHilfe BEI Problemen Technische Daten Rufnummernübermittlung CLIP-CALLER IDSicherheitshinweise TASTEN/LED Handset Basiseinheit19P Ton-/Impuls-Schalter Basisstation Handgerät BatteriefüllstandsanzeigeLadegerät NÜR B2820 TWIN/TRIPLE Einen Anruf Entgegennehmen Betrieb HandsetTelefonieren Freisprechfunktion AN-/AUSSCHALTENLautstärke Einstellen Eine Kurzwahlnummer AnrufenStummschalten DES Mikrofons Mute Flashtaste RDEN Wählmodus Einstellen Rufnummernübermittlung CLIP-CALLER IDTastenverriegelung Neue AnrufeLöschen Anmelden UND Abmelden Eines HandapparatesWählen Einer Rufnummer AUS DER Anrufliste Anmelden AN Eine B2820 BasisstationAbmelden Eines Handapparates Interner Anruf WechselsprechanlageMIT DER Basiseinheit Wählen Abwicklung DES Garantiefalles Hilfe BEI ProblemenTechnische Daten GarantieausschlüssePage U8006263