ENGLISH
8. TROUBLE SHOOTING
Symptom | Possible cause | Solution | |
No display | Batteries uncharged | Check the position of the batteries | |
|
|
| Recharge the batteries |
|
| Handset turned OFF | Turn ON the handset |
No tone | Telephone cord badly connected | Check the telephone cord connection | |
|
| The line is occupied by another | Wait until the other handset hangs up |
|
| handset |
|
The icon | Handset out of range | Bring the handset closer to the base | |
| flashes |
|
|
|
|
| |
|
| The base has no power supply | Check the mains connection to the base |
|
| The handset is not registered | Register the handset on the base |
|
| on the base |
|
Base or handset | The ringing volume is zero or low | Adjust the ringing volume | |
do not ring |
|
| |
Tone is good, but | The dialling mode is wrong | Adjust the dialling mode (pulse/tone) | |
there is |
|
| |
no communication |
|
| |
Not possible to | The FLASh time is too short | Set the unit to Long Flash time | |
transfer a call |
|
| |
on PABX |
|
| |
Telephone does not | Manipulation error | Remove the batteries and | |
react to pressing |
| but them back in place | |
the keys |
|
|
32 | Topcom Butler 2562 |