Topcom 4850 manual Key lock, Setting the dialling mode, Handset name

Page 11

Topcom Butler 4850/Twin/Triple/Quattro

5.10.2 Handset ring volume

Press the volume button in standby. ￿ The handset will ring in the current volume.￿

Use the scroll keys to select the desired volume (0-5). ￿ Press again to confirm the setting.

You can turn the ringer volume of each individual handset ON or OFF by simply press and hold the key in standby.

5.10.3 Base melody

Press Menu button ￿Use the Right button to scroll to ‘BS MELODY’ and press OK ￿ Use the Right and Left key to select the melody (1-9) and press OK .

5.10.4 Base volume

Press Menu button ￿Use the Right button to scroll to ‘BS VOLUME’ and press OK ￿ Use the Right and Left key to select the melody (0-5) and press OK .

5.11 Key lock

When the keypad is locked, pressing any key will have no effect during standby (except holding the key).

Press and hold the key. ￿ appears on the display and the keypad is locked ￿ Press and hold the key again to un-lock the keypad.

When there is an incoming call, you can still answer the call by pressing the Line button . During the call, the keypad functions as normal. When the call is ended, the keypad will be locked again.

5.12 Setting the dialling mode

There are two types of dialling mode: DTMF/Tone dialling (the most common) (default) Pulse dialling (for older installations)

To change the mode of dialling:

Press and hold the flash R button to toggle between dialling modes: ￿PULSE’ will appear when set to pulse or ‘TONE’ when set to tone (DTMF) dialling ￿ After 5 sec. the unit returns to standby

You can change by accident the dial mode of the phone when pressing the recall/Flash key ‘R’ for 5 sec in standby. The wrong dialling mode will cause that the number isn’t dialled correctly or isn’t dialled at all.

5.13 Handset name

You can change the name that appears on the screen (max. 12 characters) during idle stage: Press Menu button twice ￿ The currect handset name is shown ￿ Delete the character by the Mute -key. ￿ Use the keypad to enter the new name. ￿ Press the Menu/OK button to confirm.

ENGLISH

Topcom Butler 4850/Twin/Triple/Quattro

11

Image 11
Contents Butler 4850/TWIN TRIPLE/QUATTRO Page Phonebook Buttons Display InstallationBattery low indication Operation Reset of the handsetAnswering Machine Troubleshooting Technical Data Topcom warrantyDisposal of the device environment Safety InstructionsCleaning Buttons Icon InstallationDisplay BaseHandset Battery low indicationMulti charger Operation Paging Setting the volumeSetting the ring volume and melody Mute functionHandset name Setting the dialling modeKey lock Temporaly dial out without prefix Using the alphanumerical keypadPrefix To Edit or Delete the prefix numberCaller-ID function Clip PhonebookErasing all numbers from the Call list Consulting the Call listCalling a number from the Call list Erasing a number from the Call listRemoving a handset Register/de-register a handsetRegister to a Topcom B4850 base Internal call intercom Reset of the handsetCall transfer and Intercom between two handsets Call transfer and conference call during an external call& keys are at the bottom of the base Answering MachineLED Display Base Key FunctionsSelect outgoing message Outgoing MessagesRecording outgoing messages OGM 1 or OGM Playback the Outgoing MessageProgramming the VIP Code Setting number of RingsTurning Answering Machine On/Off Checking number of RingsChecking the VIP Code OperationRecording a Memo Playback of Incoming Messages and MemosRemote Operation Erasing MessagesMemory Full Turning Answering Machine On/Off TroubleshootingTurning answering machine on remotely Recording Outgoing MessageWarranty handling Technical DataTopcom warranty 14.1 Warranty periodVisit our website