Paging All Stations
A station can page all the stations simul- taneously. Press the [PAGE] key followed by the [*] key. The paging station’s LCD will display:
P A G E A L L
C I D : 1 0 0 / 1 9 8
The paged stations will emit a single beep. The LCD of all stations that accept the page will display:
P A G E A L L B Y 1 2
C I D : 1 0 0 / 1 9 8
The message can then be announced to all idle stations. Any station can answer an
Mute Operation
Press the [MUTE] key to temporarily remove the outgoing audio to the calling party. Pressing the [MUTE] key again deactivates the feature. The integrated
LED will illuminate when the mute fea- ture is active. The mute status remains the same when switching between the handset, handsfree and headset.
Pause Operation
Pressing the [PAUSE] key will automati- cally insert a
Flash Key Operation
Pressing the [FLASH] key will cause the telephone to open the telephone line for a programmed amount of time. The flash time can be set in programming from 100mS to 1200mS, in 100mS incre- ments. The flash may be stored in the Directory and Speed Dial locations (it will count as one digit in memory for each one used). It will not be stored in the Last Number Redial when manually dialed. It will be stored in the Last Number Redial
when dialed from the Directory or Speed Dial.
The flash key should be used to access telephone special features such as call waiting and 3 way calling.
Temporary Tone Dialing
The telephone dialing can be temporarily changed to tone when the default dialing is set to pulse in programming mode.
Press the [*/TONE] key when tone serv- ice is needed. A
NSQ412