The following list explains the keys that are used during programming:
Keys to use | Programming function | ||
[PROGRAM] | Enter the programming operation | ||
[JOG] knob | Scroll among the programming items or values | ||
NAVIGATION [<] | Return to the previous programming level or perform a back- | ||
| space while editing | ||
NAVIGATION [>] | Enter the next lower programming level | ||
[REMOVE] | Remove the current setting and return to the default value | ||
[SAVE] | Save the current setting | ||
[RELEASE] | Quit the programming operation | ||
| Press the [PROGRAM] key while the | ||
| extension is idle to start the program- | ||
| ming mode. The LCD will display: | ||
|
|
|
|
|
| P R O G R A M | |
|
| T u r n D i a l |
|
|
|
|
|
| Rotate the [JOG] knob repeatedly until | ||
| the display shows the programming item | ||
| to be set. Follow the display prompts to | ||
| select the setting needed. A single beep | ||
| is heard if programming succeeds. A | ||
| double beep is heard if programming | ||
| fails. | ||
| If no key is pressed in approximately | ||
| twenty seconds, the programming opera- | ||
| tion will be automatically canceled. |
NOTE: Programming will automatically disable after 120 seconds while setting the Time/Date. Any programming changes not entered with the [SAVE] key will be lost.
Language Programming
The LCD prompts can display in English or Spanish. To program the Language, enter the programming mode and turn the [JOG] knob until the display shows LANGUAGE. The LCD will display:
L A N G U A G E
T | u | r n | D | i | a l |
> | : | e n | t | e | r |
Press the NAVIGATION [>] key to enter the Language setup mode. Rotate the [JOG] knob to select English or Spanish. The LCD will display:
L A N G U A G E
=E n g l i s h
T u r n D i a l
S A V E : s a v e ?
or
NSQ412