Verizon NSQ412 owner manual Prime Line Preference Programming, Line Group Programming, I M E N E

or

L 3 U S A G E

=O f f

T u r n D i a l

S A V E : s a v e ?

Press the [SAVE] to confirm the setting. The LCD will display:

L 3 U S A G E

=O f f

P r o g r a m m e d !

After approximately five seconds, the dis- play will return to the highest level of the current setting.

Prime Line Preference

Programming

The Prime Line is the one that has the highest priority to go off-hook when the station is idle and you lift the handset, press the [SPEAKER] or [HEADSET] keys. To program the Prime Line Preference, enter the programming mode and turn the [JOG] knob until the display shows PRIME LINE. The LCD will dis- play:

P R I M E				L I N E
T	u	r n	D	i	a l
>	:	e n	t	e	r

Press the NAVIGATION [>] key to begin to select the Prime Line. Rotate the [JOG] knob to change the selection. For example, the LCD will display:

P R I M E L I N E

=L 1

T u r n D i a l

S A V E : s a v e ?

•

•

P R I M E L I N E

=L 4

T u r n D i a l

S A V E : s a v e ?

Press the [SAVE] key to confirm the selection. For example, the LCD will dis- play:

P R I M E L I N E

=L 3

P r o g r a m m e d !

After approximately five seconds, the dis- play will return to the highest level of the

current setting.

Line Group Programming

This setting allows lines 2, 3 and 4 to have different telephone numbers for dif- ferent stations (non-square). Stations sharing the same telephone numbers on a line need to be programmed as part of the same group. To program the Line Group, enter the programming mode and turn the [JOG] knob until the display shows LINE GROUP. The LCD will dis- play:

L I N E G R O U P

T	u	r n	D	i a l
>	:	e	n t e	r

Press the NAVIGATION [>] key to begin programming the Line Group. Rotate the [JOG] knob to change the CO Line. The LCD will display:

L 2 G R O U P

T	u	r n	D	i a l
>	:	e	n t e	r

•

•

NSQ412 Four-Line Caller ID Telephone Owner’s Manual 45