Snom VoIP Phone manual Redirection, Ringtones

Page 49

Settings

MWI Dial Tone

Set the dialtone to stutter mode in case of an active MWI.

Use Headset Device

Select the headset device you would like to use. Select “none” if you don’t want to use a headset.

Use Backlight

The snom220’s display has a built-in backlight. If you set this function to ‘on’, the backlight will be turned on when you press a key on the phone. It is automatically switched off after a short time.

REDIRECTION

You can have all incoming calls diverted to a specific number.

The following options for redirection are available:

Never: This deactivates all call diverts.

Always: All calls are diverted to the number specified in “Number Redirect”.

When Busy: When a call is in progress, any other call made to that number is rejected and will receive a busy indication. The phone can be set in such a way that the second caller is diverted to another number set in “Number Busy”.

After Timeout: Calls are diverted after the timeout in seconds specified in “Timeout” to the number specified in “Number Redirect.

The following fields for diversion are available:

Timeout

Specifies the timeout in seconds after which the call should be diverted.

Number redirect

Specifies the number to which the calls should be diverted.

Number busy

Specifies the number to which the calls should be diverted if the phone is busy.

RINGTONES

This section looks like the following:

49

Image 49

Contents 26 Aug Manual v3.40 EnglishPage Foreword Table of Contents Appendix Delivery Content InstallationSafety Notes Connecting the phoneKeypad Initialization BootingSelecting the IP Address Dhcp ConfigurationSelecting the IP Gateway Selecting the NetmaskSelecting the DNS Server Selecting the Tone SchemeLogging on the first account Selecting the TimezoneMobility LogonLogon Wizard Logon User Snom MenuLogoff User Logoff AllDND Mode on/off Challenge/AuthenticationLogon Idle State Basic FunctionsDialing Dialing a phone number Input ModesKey mapping Dialing an H.323/SIP AddressEnter Number guessing Dialing an IP AddressTerminating a call Accepting a Call Incoming CallDenying/Blocking a Call Adjusting the VolumeMute / Unmute Programmable Keys Handset / Handsfree / HeadsetLine Intercom DestinationPark orbit Main MenuVoice recorder Ring Tones Adjusting the Volume in Idle ModeAbout Hold and Resume Advanced FunctionsTransfer Direct TransferConsultation Transfer ConferenceCall Completion Call DiversionOn no response Ccnr Short Messages SMS Dtmf TonesMessage Waiting Indication MWI Conducting a Software Update Pickup Additional PBX FeaturesConference Phone Book Call RegisterAdding an entry Editing an entry Page Import ExportPreview Call Lists Speed Dial Dialing Deny ListEditing speed dial entries BrowsingNumbers to be denied are displayed here Key mapping Adding a numberRemoving a number Settings via Phone SettingsIllustration 1 Web configuration Settings via Web BrowserSetup Preferences Settings OptionsRingtones RedirectionAuto Answer Privacy Settings Setup Speed DialSpeed Dial Table Function Keys Setup Line1-7Advanced Line Settings Login InformationNetwork Setup AdvancedDNS Time SettingsHttp Phone Behaviour Support for Broadsoft call control can be enabled here Keys Audio PreselectionAdvanced Network Set up the payload type for Out of band Dtmf here, e.g Update Debug VlanSecurity CertificatesManual Software Update Setup Update323 System Information StatusLog SIP TraceMemory SettingsDNS Cache Pcap TraceAppendix Safety StandardsStandard Conformance Name and address of manufacturerAbout IndexTOS Page Snom technology AG