Snom VoIP Phone manual Keypad

Installation

If you want to use a headset, it can be connected to the audio jacks on the rear side of the snom 220. The connector named “In” is for the microphone.

Keypad

The numeric keypad with the keys 0 to 9, * and # is used to enter digits and letters. Depending on the operating mode, different actions can be performed (see the table below):

Entry of digits only (e.g., when dialing a phone number),

Typing in letters and digits by pressing the keys repeatedly (similar to a cellular phone).

The MENU key is used to invoke the main menu. To cancel actions or input, the CANCEL key can be used. The ENTER key confirms actions, selections and inputs.

Depending on the operating mode, the keys can have context-specific meanings which are described in this manual.

The soft keys F1 to F4 located below the display are context-sensitive function keys. Their current mapping is depicted with symbols in the bottom line on the display.

The five keys on the right with LEDs on them are the programmable function keys that different functionalities can be mapped onto.

The keys of the numeric block in different operating modes:

7