Snom VoIP Phone manual Setup Advanced, Network

Page 54

Settings

Transport

Select the protocol for transport layer communication through this setting.

Offer ICE

Choose whether you want to use ICE or not.

Codec 1-5

You can select the preferred order for the potential used codec. The available options are G.711 ulaw, G.711 alaw, GSM, G.726-32 and G.729a.

Packet size

Select the packet size in bytes. It affects only ulaw and alaw codecs (other codecs have fixed packet size). Eighty (10 ms), 160 (20 ms), 240 (30 ms) and 320 (40 ms) bytes are available.

Setup Advanced

NETWORK

With these settings you can set up the basic network settings of your phone. The web interface for this looks like the following:

DHCP

Turn on or off the use of DHCP with this option.

IP address

You can change the IP address of the device through this setting. Changing this parameter requires a reboot. This parameter is mandatory in order to enable the ethernet connection.

Netmask

Change the netmask for the device. Changing this parameter also requires a reboot.

Phone name

Change the hostname of the phone here. If this parameter is available, it is used for identifying the device in SIP signaling.

54

Image 54

Contents Manual v3.40 English 26 AugPage Foreword Table of Contents Appendix Safety Notes InstallationDelivery Content Connecting the phoneKeypad Booting InitializationDhcp Configuration Selecting the IP AddressSelecting the DNS Server Selecting the NetmaskSelecting the IP Gateway Selecting the Tone SchemeSelecting the Timezone Logging on the first accountLogon MobilityLogon Wizard Logoff User Snom MenuLogon User Logoff AllChallenge/Authentication DND Mode on/offLogon Basic Functions Idle StateDialing Input Modes Dialing a phone numberDialing an H.323/SIP Address Key mappingEnter Dialing an IP Address Number guessingTerminating a call Incoming Call Accepting a CallAdjusting the Volume Denying/Blocking a CallMute / Unmute Handset / Handsfree / Headset Programmable KeysLine Destination IntercomMain Menu Park orbitVoice recorder Adjusting the Volume in Idle Mode Ring TonesAbout Transfer Advanced FunctionsHold and Resume Direct TransferConference Consultation TransferCall Diversion Call CompletionOn no response Ccnr Dtmf Tones Short Messages SMSMessage Waiting Indication MWI Conducting a Software Update Additional PBX Features PickupConference Call Register Phone BookAdding an entry Editing an entry Page Export ImportPreview Call Lists Speed Dial Editing speed dial entries Deny ListDialing BrowsingAdding a number Numbers to be denied are displayed here Key mappingRemoving a number Settings Settings via PhoneSettings via Web Browser Illustration 1 Web configurationSettings Options Setup PreferencesRedirection RingtonesAuto Answer Setup Speed Dial Privacy SettingsSpeed Dial Table Setup Line1-7 Function KeysLogin Information Advanced Line SettingsSetup Advanced NetworkTime Settings DNSHttp Phone Behaviour Support for Broadsoft call control can be enabled here Keys Preselection AudioAdvanced Network Set up the payload type for Out of band Dtmf here, e.g Update Security VlanDebug CertificatesSetup Update Manual Software Update323 Log StatusSystem Information SIP TraceDNS Cache SettingsMemory Pcap TraceStandard Conformance Safety StandardsAppendix Name and address of manufacturerIndex AboutTOS Page Snom technology AG