Snom VoIP Phone manual Keys

Settings

Dialog-Info Call Pickup

snom phones subscribe to the status information of SIP URL's mapped as “Destination” on the programmable keys. By turning this setting on, the user will be offered a pickup if a mapped destination gets a call and is in the ringing state. The display will change in the idle state to show the source and destination of that call and the user can pick it up by

pressing the ENTER key . The pickup offer will be available as long as the destination is ringing and disappear when the user of the phone offering pickup presses CANCEL , when the call is connected, when the call is cancelled by the caller, or when a third party picks up the call.

Call Waiting Indication

You can enable or disable the CWI on the phone through this setting.

Dialtone during Hold

Turning this setting on will produce a dial tone when a call is being held and the user is trying to dial a second number. A dial tone will not be played when this setting is not turned on.

Disconnect on On-hook

Sometimes it is useful to disable the disconnection of a call when the handset is placed on-hook, e.g., during conference calls or handsfree mode, etc. This can be achieved by turning this setting off.

Keys

Here you can change the key behaviour on the phone to your wishes. The web page may look like this:

Break Key

The “Break” key on the phone can be used either to disconnect the connected call or as a “Transfer” hard key. You can make that choice through this setting.

Transfer on On-hook

In case the transfer feature triggered by on-hook is confusing you, you can switch it off here.

58