Sharp ZQ-P20A operation manual Editing or deleting entries, Calculator Mode, Calculation

Editing or deleting entries

Editing

1.Recall the entry to be edited.

2.Tap EDIT . The cursor starts to flash.

3.Tap , , , or to move the cursor to the position to be edited.

4.Enter, insert, or delete characters (refer to “Entering Characters”).

• To cancel editing, tap C•CE .

5.Press ENTER several times (until “STORED!” appears briefly) to finish editing and to store the entry.

Deleting

1.Recall the entry to be deleted.

2.Tap DEL .

•“DELETE?” is displayed.

•To cancel the deletion operation, tap f.

3.Press ENTER to delete the entry.

10

Calculator Mode

The Organizer can calculate numbers of up			2nd
to 10 digits. Tap		several times
	CALC/CONV
to display the Calculator mode screen			0.
(Calculator → Currency conversion → Unit
conversion → Calculator...).

Calculation

Be sure to tap C•CE , C•CE , and CM to clear the display and

memory before performing a calculation. Note

•When , , , or is tapped, the respective symbol, +, –, ⋅, or ÷ is displayed. (In the examples in this manual, these symbols are not described.)

If an error occurs

If the calculation result or the integer section in the numerical value in the memory exceeds 10 digits or if a number is divided by zero (0), an error occurs (“ERROR” is displayed).