Registering a Password, Secret Function, 1234567

1 HIDE SECRET

2 DELETE PASSWORD

Secret Function

The Secret function allows you to protect confidential listings with a password, so that no unauthorized person can recall them.

1. Registering a Password

(1)Turning the Secret function off

1. Press 2nd SECRET .

2. Enter the password and press

ENTER .

(Enter “1234567” in this case.)

ALLOW ACCESS TO S SECRET DATA

[– ]

Up to 7 characters can be registered for the password.

If you forget the password, it will be necessary to clear the password and all secret listings from the memory (see page 18). As a safeguard, make a written record of the password.

1.	Press	2nd	SECRET	.	SET	PASSWORD
•	If “ALLOW ACCESS TO SECRET DATA”				SET	PASSWORD
•	If “ALLOW ACCESS TO SECRET DATA”				[–	]
	is displayed instead, a password is
	already registered.
	already registered.

To delete and change the password, refer to page 22.

2.Enter the password. For example,

1234567


3.	Press	ENTER		.	PASSWORD
	“PASSWORD [1234567] IS NOW SET”				S [1234567	]
	“PASSWORD [1234567] IS NOW SET”				IS NOW SET
	and an “ S ” are displayed.
	The “	S ” indicates the Secret
	The “	S ” indicates the Secret
	function is in effect.
4.	Press		to display the entry prompt.
4.	Press	C•CE	to display the entry prompt.

2. Turning the Secret Function On and Off

When the Secret function is on, an “ S ” is displayed. When the Secret function is off, the “ S ” is cleared even after the password is registered.

“SECRET DATA ACCESSIBLE!” is displayed briefly. The Secret function is now off and secret listings can be recalled. The display changes into the entry prompt without the “ S ”.

•If the incorrect password is entered, “INCORRECT PASSWORD!” will be displayed briefly and the display changes into the entry prompt.

•Even after the Secret function is turned off, the Secret function will automatically be turned on after manual or auto power off.

(2)Turning the Secret function on

1. Press 2nd SECRET .

2. Press 1 to select “1 HIDE SECRET”.

“SECRET DATA IS HIDDEN!” is displayed briefly. The Secret function is now on and secret listings cannot be

recalled. The display changes into the entry prompt with the “ S ”.

3. Designating the Listings as Secret

Only one password can be registered, but many secret listings can be entered.

A “ ” next to a listing indicates it is secret. Secret listings cannot be recalled unless the Secret function is off.

(1)	Storing a listing as secret
1.	Press				during the data entry.
		2nd	MARK
	A “ ” is displayed.
2.	Press			to store it in the memory.
		ENTER