Camp On Busy
(Available only when you have more than one handset)
This feature allows your handset to wait for connection to the telephone line currently engaged by another handset. Your handset rings when the telephone line becomes free.
1.You hear a short busy tone if you open the flip cover or
press 
key while another handset engages the telephone line.
The display shows the handset number currently engaging the line. Your handset is automatically camped on the line.
Note: To cancel this feature, press 
key any time before the line is free. The handset returns to Standby mode.
2.Your handset rings and the window displays FREE when the line becomes free.
3.Press 
key to engage the line while the handset rings.
Notes:
•If an incoming call arrives while your handset rings to tell you the line is free, the ‘Camp On Busy’ feature is automati- cally cancelled and an incoming ring sounds.
•Several handsets can be camped on the busy line in chronological order. When the line becomes available to you, the LCD window displays FREE, and other handsets will display your handset number following the word BUSY.
•When your handset rings and the window displays FREE, press the key within 10 seconds. Otherwise, the handset returns to the Standby mode.
Receiving a Call
When somebody calls you, the phone rings. Also, the 
icon in the middle of your handset’s display and the telephone lamp on the left of the base will start to blink.
The caller’s phone number will be displayed if the telephone network has transmitted the necessary information.
1.If the handset is on the base, pick up the handset and speak. Or
If the handset is out of the base, open the flip cover and speak, press the 
or 
keys on the side of the phone. Or
If the handset is in the Standby mode with the flip cover
open, press 
key.
Note: 
key and 
key will not work for three sec- onds after the flip has been opened to receive a call in order to prevent the phone from being disengaged.
2.To end the call, close the flip cover or press 
key. Or Place the handset in the base unit.
Note: If you set the ‘Ring Delay Time’ feature, you can turn the handset ringer off for the specified time when a call comes in and other handsets are ringing. Refer to ‘Ring Delay Time’ on page 48.
20 General Functions | General Functions 21 |