Adjusting Ring Volume | (Menu |
|
|
1.In the Standby mode, press the Menu soft key.
2.Press the 
soft key repeatedly until Ring appears, then press the Select soft key.
3.Press the 
soft key repeatedly until Ring Volume appears, then press the Select soft key. The current Ring Volume setting appears.
4.Press the 
or 
key on the side of the phone to choose the volume level you want.
Each time you press 
or 
key, the handset sounds the ring with the level you have chosen.
The ring volume is displayed as bars in the LCD window. The more bars you see, the louder the volume is.
5.Press the OK soft key to confirm the setting.
Choosing Alert Type | (Menu |
|
|
This option allows you to indicate how you wish to be informed of any incoming calls. The following options are available.
1.In the Standby mode, press the Menu soft key.
2.Press the 
soft key repeatedly until Ring appears, then press the Select soft key.
3.Press the 
soft key repeatedly until Alert Type appears, then press the Select soft key.
The Alert type options are displayed:
•Ring: The handset rings using the ring tone selected via the ‘Ring Tone’ menu.
•Vibra + Ring: The handset vibrates first, then rings.
•Vibration: The handset vibrates but does not ring.
4.Press the 
soft key to select the alert type, then press the OK soft key.
Notes:
•Your handset will ring when it is on the base unit, even if it has been placed in vibration mode.
•To switch to vibration mode quickly, press and hold the 
key in the Standby mode. To resume the handset’s alert
type, press and hold the 
key again in the Standby mode. Refer to page 26.
44 Ring | Ring 45 |