To Erase All Numbers In Redial Memory
1.Press the Redials soft key in the Standby mode.
2.Press the All Erase soft key. The display prompts you to confirm the setting.
3.Press the Yes soft key. You hear a beep and the phone returns to the Standby mode after clearing the redial memory.
Battery Level Indicator
A
icon is continuously displayed in the upper line of the
LCD window. The 
icon shows the level of your battery. The more bars you see, the more power you have left.
H S ( 1 ) | B S ( 1 ) |
S A M S U N G
FlatFull
When the battery is weak and a few minutes of talk time
remain, you will hear a warning tone and the 
icon blinks.
When the battery becomes too weak for the phone to operate, the handset will automatically turn off. Place the handset on the base unit to charge the handset battery.
Out of Range Indicator
Your phone indicates the received signal strength through the strength icon. The more bars you see, the stronger the signal is. If the handset is too far from the base unit and the handset cannot properly engage the telephone line, the 
icon blinks in the LCD window.
Signal |
|
|
Strength Icon | H S ( 1 ) | B S ( 1 ) |
|
S A M S U N G
If you move out of range during a call, the telephone line might be disconnected and the handset returns to the Standby mode. Check if the icon blinks in the LCD window. If so, move the handset closer to the base unit.
Adjusting Voice Volume
During calls, pressing the 
or 
keys on the side of the phone affects the ear piece volume.
You can adjust the volume from level 1 to 5, and it is preset to level 3. The voice volume is displayed as bars in the LCD window. The more bars you see, the louder the volume is.
V o i c e V o l u m e
[ _ |
|
|
| ] |
|
| |||
F l a s h |
|
| R e d i a l s | |
|
|
|
|
|
Ear piece volume indicator
24 General Functions | General Functions 25 |