Samsung SP-R6100 user manual LCD Window Icon Descriptions, Choosing Dial Mode, Using Headset

Page 9

LCD Window Icon Descriptions

H S ( 1 )	B S (	1 )
S A M S U N G
Signal Strength icon		Vibration icon
Line icon		Battery status icon

Choosing Dial Mode	(Menu 5-1)

In order to provide compatibility with most telephone systems, your phone can be set to either pulse-dialling (same as rotary), or tone dialling (DTMF). Your phone is preset to tone mode.

1.In the Standby mode, press the Menu soft key to access the menumode.

2.Press the soft key repeatedly until Settings appears, then press the Select soft key.

3.Tone/Pulse is displayed. Press the Select soft key.

4.The options are displayed; Pulse and Tone. Press the soft key to change the setting.

5.Press the OK soft key to save the setting in the brackets.

Using Headset

With the headset, you can talk without using your hands. When you connect the headset to the headset jack on the left side of the phone, the headset operates in the same way as the phone’s speaker and microphone.

Pressing the button on the headset for more than one second allows you to answer or end a call(without opening the flip cover or pressing a key on the phone).

You can also answer a call by pressing the or keys on the side of the phone.

Speaker

			To the headset jack
Button			To the headset jack
Button			(	) on the left
			(	) on the left
			side of the phone.
			side of the phone.


Microphone

Clip

Allows you toattachthe headset to your clothes, for example.

16 Getting Started

Getting Started 17

Image 9

Contents User’s Manual Important Notices Safety PrecautionsYou can use this equipment to make 999, 112 emergency calls Table of Contents Checking Parts Getting StartedControl Locations HandsetBase Connecting LinesPaging key LampHandset uses the rechargeable Ni-MH battery sup- plied Installing Handset BatteryTo turn on the handset when the display is off, press key Charging the HandsetTurning the Handset On/Off Choosing Dial Mode Using HeadsetLCD Window Icon Descriptions Making a Call General FunctionsOpen the flip cover, and press key. You hear a dial tone To press the key. For details, seeCamp On Busy If the handset is in the Standby mode with the flip coverReceiving a Call Open, press keyLast Number Redial Caller ID DisplayTo Dial the Last Number To View and Dial Any of Last 10 NumbersOut of Range Indicator Battery Level IndicatorAdjusting Voice Volume To Erase All Numbers In Redial MemoryQuick Switching to Vibration Mode Adjusting Key VolumeTone Dial Switchover Registered RecallUsing the Menus Using the Soft KeysUsing the Index System Call Time Menu MapActive Flip LanguageStoring a Phone Number with a Name Menu PhoneBookEntering a Name À ä å æDialling a Number in Phonebook Using a PauseOne-Touch Dialling Two-Touch DiallingSearching for Numbers in Memory By NameBy Address Number Phonebook Options Erasing All NumbersViewing and Dialling a Number Received Calls Caller IDReceived Calls Options Save BookRing Greeting MessageGreeting Message Choosing Ring ToneChoosing Alert Type Adjusting Ring VolumeUnique Ring Tone mode see steps 1 through 3 on Unique Ring Tones for selected calls MenuTo Deactivate a Number’s Unique Ring Tone Ring Delay Time SettingsTone/Pulse Call Time DisplayBase Number Display Active FlipLanguage Selection Call Barring SystemTo Set Call Barring Numbers To Deactivate a Specific Call Barring NumberRegistering a New Handset Unplug the power cord and then plug it in againIntercom Between Handsets Removing a Handset Call Transfer Between HandsetsYou can transfer a call from one handset to another Enter the PIN code, then press the OK soft keyCorrect the number by using the key Reset HandsetChanging PIN Redials/Received Calls/Phonebook All Erase Ring Tone ToneBase Display shows the current setting OFF or ON. PressSelecting Base Manually Finding Base AutomaticallySpecifications TroubleshootingMonths Warranty Samsung Supreme ServiceThis warranty applies to the original purchaser only EPS Limited