≈∞Δ˘ 99.1.20 2:58 PM Δ‰¿Ã¡ˆ37
GROUP LISTENING
When engaged on a call and using the handset, you may want other people to hear the distant party's voice over the speaker:
•Press the LISTEN key to turn on the speaker. The microphone is not in use, so the distant party does not hear other parties present in your office.
•Press LISTEN again to turn the speaker off and resume private conversation.
•Repeat if necessary.
NOTE: Depending on speaker volume and the acoustics of your office, it may be advisable to turn the group listening feature off before hanging up. This will eliminate a momentary squeal.
ACCOUNT CODES
When equipped with optional equipment, your SAMSUNG DCS system will allow calls to be charged to a specific account:
•During any outside C.O. call, press the account (ACCT) key.
•Enter the account code (maximum 12 characters including ✽ and #). Press the ACCT key again. Your conversation will not be interrupted.
NOTE: If you make an error before you complete the account code, press the ACCT key twice and redial the correct code. Only the last account code dialed will be printed.
LOCKING YOUR KEYSET
You can allow/disallow incoming/outgoing calls from your keyset using this option. There are three possible levels, Unlocked, Locked all and Locked out. Unlocked means you can use your keyset without restriction, while Locked all level is to prevent other people from making or receiving calls from your keyset while you are away. The Locked out
37