VTech VT 9152 SET Base Ringer, SET Number of Rings, Checking DAY and Time, Recording a Memo

Page 15

ANSWERING SYSTEM SETUP

Now, follow the steps in 1 SET OUTGOING MESSAGE to record your “Announce Only” greeting. The VT 9152 Answering System will retain both outgoing greetings; one for Normal (record messages) mode, and one for Announce Only mode.

NOTE!!!!! THE ANSWERING SYSTEM IS PRESET AT THE FACTORY FOR AN- NOUNCE ONLY OFF. THIS IS THE NORMAL MODE, REQUIRED FOR YOUR VT 9152 TO RECEIVE MESSAGES FROM CALLERS.

6 SET BASE RINGER

You can turn your Base Unit On or Off. This is independent of the Handset ringer.

•Press ANS. MACHINE on the Handset.

•Press 4 (MENU) six times. You will hear “Set Base Ringer”.

•Press 6 (SELECT) to toggle between On and Off.

•Press 5 (SET) to confirm your selection.

•Press 4 (MENU) to continue programming, or OFF to exit.

7 SET NUMBER OF RINGS

Choose between 2, 4, 6, or Toll Saver. Toll Saver will cause the Answering System to activate after 4 rings if there are no new, unplayed messages, and after 2 rings if there are new, unplayed messages.

•Press ANS. MACHINE on the Handset.

•Press 4 (MENU) seven times. You will hear: “Set Number of Rings”.

•Press 6 (SELECT) to choose between 2, 4, 6 and Toll Saver.

•Press 5 (SET) to confirm your selection.

•Press 4 (MENU) to continue programming, or OFF to exit.

NOTE: DURING PROGRAMMING, PRESS ANS. MACHINE OR OFF AT ANY TIME TO EXIT.

CHECKING DAY AND TIME

•Press ANS. MACHINE on the Handset.

•Press 5 (SET). The current Day and Time setting can be heard from the Handset earpiece.

RECORDING A MEMO

•Press ANS. MACHINE on the Handset.

•Press 7 (RECORD). After the prompt: “Now Recording”, speak into the Handset.

•Press OFF or ANS. MACHINE to end recording and exit Answering System mode, or press 2 (STOP) to end recording and stay in Answering System mode.

TURNING YOUR ANSWERING SYSTEM ON/OFF

Your VT 9152 Answering System is turned ON when you first apply power to it. From the Handset you can turn the system ON and OFF.

•Press ANS. MACHINE on the Handset.

•Press 0. Through the earpiece, you will hear “Answering Machine OFF (or ON). Continued presses of the 0 key will toggle between ON and OFF.

•Press OFF to exit programming mode.

ADVANCED OPERATION

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents
Table of Contents Additional Information Important Safety Instructions Parts Check List IntroductionRecharging the Battery Pack Replacing the Handset BatteriesGetting Started Getting Started Setting UP Your VT Wall Mounting Handset Features and Keys Getting Started Base Unit Features and Keys Getting Started Basic Operation Using Your VT 9152 Cordless Telephone Basic Operation Call Screening from Base Unit Basic Operation Answering System OperationIntroduction USE the VT 9152 Handset to Program Your Answering SystemKEY Function Handset Layout for Answering System OperationAnswering System Setup Recording a Memo SET Base RingerSET Number of Rings Checking DAY and TimeTo Hear Your Outgoing Greeting Playback of GREETINGS, Messages and MemosRemote Operation of Your VT 9152 Answering System Remote CommandsHeadset Operation Belt ClipOperation No Dial Tone Handset does not Ring When YOU Receive a CallCase of Difficulty Phone DOESN’T Work AT ALLAnswer ON/OFF Light on the Base Unit is Blinking YOU Hear Other Calls While Using Your PhoneYour Caller Fades in and OUT Your Answering System is not Recording MessagesWhat is not covered by this limited warranty? Limited Warranty StatementWhat does this limited warranty cover? How long is the limited warranty period?Other limitations How do you get warranty service?FCC and IC Regulations FCC PartIC Industry Canada Rbrc R Seal Taking Care Ofyourtelephone MaintenanceTechnical Specifications Page Issued
Related manuals
Manual 28 pages 3.99 Kb