•Chain dialing can be useful if you wish to access numbers other than phone numbers (such as bank account information or access codes) from the directory, call log or redial list.
Telephone operation
Chain dialing
This feature allows you to initiate a dialing sequence from numbers stored in the directory, call log or redial list while you are on a call.
To access a number in the directory:
1.Press MENU/SELECT twice to enter the directory menu.
2.Scroll by pressing 
or 
to find the desired entry.
3.Press MENU/SELECT to dial the desired number when it is displayed. To access a number in the call log:
1.Press MENU/SELECT and then press 
to select >CALL LOG.
2.Press MENU/SELECT to confirm.
3.Scroll by pressing 
or 
to find the desired entry.
4.Press MENU/SELECT to dial the desired number when it is displayed. To access the last number in the redial list:
• Press REDIAL/PAUSE to dial.
• Press REDIAL/PAUSE again within two seconds to cancel the chain dialing.
Find handset
This feature allows the telephone base to page the handset.
1.Press FIND HANDSET on the telephone base. The handset will ring and its screen displays ** PAGING **.
2.Press 
/FLASH,
/SPEAKER or any dialing key
** PAGING **
14 | www.vtechphones.com |