•If the memory is full, the system will answer after 10 rings and announce, “Memory is full. Enter the remote access code.”
•If the answering system is off, the system will answer after 10 rings and announce, “Please enter your remote access code.”
•If the system has less than five minutes of recording time left, the remaining time will be announced.
•If F is flashing in the message window, the memory is full. You will have to delete some messages before new ones can be recorded.
Answering system
New message indication
The message display counter will flash when there are new answering system messages.
If the new message alert tone is turned on, the telephone base will beep every ten seconds when there are unreviewed messages.
Message playback
1.Press 
/PLAY/STOP to listen to messages.
2.Press 
/PLAY/STOP again to stop playback.
If you have new messages, you will hear only the new messages (oldest first). If there are no new messages, the system will play back all messages (oldest first).
When playback begins, the total number of messages is announced, followed by the day and time of the first message to be played.
Options during playback
•Press 
VOL+/
VOL- to adjust the speaker volume.
•Press 
/SKIP to skip to the next message.
•Press 
/REPEAT to repeat the message currently playing. Press 
/REPEAT twice to listen to the previous message.
•Press X/DELETE to delete the current message. The system will advance to the next message.
36 | www.vtechphones.com |