VTech Essential Battery Information for Your Cordless Telephone | www.vtechcanada.com
Page 70

Appendix

Battery

It takes up to 11 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:

Operation

Operating time

While in handset use (talking*)

Up to 7 hours

 

 

While in speakerphone mode (talking*)

Up to 3.5 hours

While not in use (standby**)

Up to 5 days

*Operating times vary depending on your actual use and the age of the battery.

**Handset is not charging or in use.

The battery needs charging when:

•A new battery is installed in the handset.

•The handset beeps every 50 seconds while on a call.

•The handset beeps and Low battery displays on the handset.

•Put in charger displays on the handset.

•A battery is properly installed and the screen is blank.

CAUTION:

To reduce the risk of fire or injury, read and follow these instructions:

•Use only the batteries provided or equivalent. To order a replacement, visit our website at www.vtechcanada.com or call 1 (800) 267-7377.

•Do not dispose of the batteries in a fire. Check with local waste management codes for special disposal instructions.

•Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

•Exercise care in handling batteries in order not to create a short circuit with conductive materials.

•Charge the batteries provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

•Observe proper polarity orientation between the battery and metallic contacts.

•To prevent fire or shock hazard, do not expose this product to water or any type of moisture.

66

Page 69 Page 71
Image 70
Page 69 Page 71
Contents Complete user’s manual Congratulations Table of contents Appendix Answering system settingsAnswering system operation IndexParts checklist Getting startedTelephone base and charger installation Battery installation If you do not hear a dial toneBattery charging Displays Put in chargerInstallation options Tabletop to wall mount installationGetting started Wall mount to tabletop installation See Telephone base and charger installation onTo use the built-in answering system Are you a new cable or VoIP subscriber?To use the voicemail Telephone base layout DeleteMENU/SELECT Tone Volume Handset layoutMUTE/DELETE Handset ringer volume Telephone settingsUsing the menu To enter the menuTelephone base ringer volume Ringer toneTo set the duration and turn on the quiet mode Quiet modeTo turn off the quiet mode Set date and time LCD language Press Select to choose LCD languageVoicemail number To set your voicemail numberTo manually turn off these indicators Clear voicemailHome area code Key tonePress /CID or / to choose Key toneOn or Key toneOff Dial mode Predial a call Telephone operationMake a call Answer a callMute VolumeCall waiting Temporary tone dialing Handset speakerphoneTemporary ringer silencing To silence the handset ringerTo review and dial a redial entry RedialTo delete a redial entry To access a number on the redial list To access a number in the directoryTo access a number in the caller ID log Check voicemailTransfer a call To start paging Find handsetWeb address To end pagingIntercom Multiple handset useJoin a call in progress To share an outside callTo initiate an intercom call at the telephone base Speaker or INT. Both devices display Intercom endedTo answer on a cordless handset Call transfer using intercomAnswer an incoming call during an intercom call To answer at the telephone baseIntercom Directory About the directoryAdd a directory entry Press Select to choose Add contactDirectory Alphabetical search Review and dial from the directoryTo start an alphabetical search Edit a directory entry Delete a directory entrySpeed dial Assign a speed dial entryReassign a speed dial entry Dial a speed dial numberDelete a speed dial entry About caller ID Caller IDInformation about caller ID with call waiting Missed call indicator Caller ID logMemory match Review and dial from the caller ID logView dialing options Save a caller ID log entry to the directory To delete an entry Delete the caller ID log entriesCaller ID log screen messages To delete all entriesAnnouncement Answering system settingsAnswering system Record your own announcementPlay the announcement Delete your announcementTo turn on or off with a handset or the telephone base Answer on/offTo turn on or off with the telephone base CID orNumber of rings To turn this feature on or offCall screening Press Select to choose Call screeningRemote access code Message alert toneVoice language Recording timePress /CID or / to choose 3 minutes, 2 minutes or Answering system and voicemail Using the answering system and voicemail togetherAnswering system operation If XX new messages displays and /PLAY/STOP onMessage capacity New message indicationTo screen a call at the telephone base Call interceptMessage playback To screen a call at a handsetTo play messages with a handset To play messages at the telephone baseOptions during playback To delete all messages with the telephone base Delete all messagesRecord, play or delete memos To delete all messages with a handset or the telephone baseRemote access Command DescriptionAdd and register a handset AppendixExpand your telephone system To register a handsetReplace a handset To deregister all handsetsScreen messages Appendix Handset lights Handset and telephone base indicatorsTelephone base lights Handset icons Telephone base iconsBattery Operation Operating timeThere is no dial tone TroubleshootingMy telephone does not work at all Cannot dial outMy cordless handset isn’t performing normally Low battery shows on the handset screenCharge light is off Telephone does not ring when there is an incoming call Appendix Hear noise on the cordless handset and the keys do not work Hear other calls when using the telephoneMy caller ID features are not working properly Telephone does not receive caller ID while on a callNew voicemail display and I don’t know why Out of range or no pwr at base shows on the handset screenCannot retrieve voicemail messages Answering system does not record messages Answering system does not respond to remote commandsOutgoing announcement is not clear Messages on the answering system are very difficult to hearCommon cure for electronic equipment Important safety instructions ECO mode Precautions for users of implanted cardiac pacemakersOperating range Maintenance Taking care of your telephoneAbout cordless telephones Rbrc sealLimited warranty What does this limited warranty cover?How do you get warranty service? FCC, Acta and IC regulations FCC PartTechnical specifications Industry CanadaIndex Index All rights reserved. Version 1 07/13
Related manuals
Manual 89 pages 46.54 Kb

CS6859-2, CS6859, cs6858-3 specifications

The VTech CS6859 series of cordless phones, which includes models CS6859-3, CS6859, CS6859-4, and CS6859-2, offers a range of features designed to enhance communication for residential use. Known for their reliability and user-friendly designs, these models combine modern technology with practical functionalities catering to the needs of users.

One of the standout features of the CS6859 series is its cordless design, allowing users to move freely while on calls. This series typically includes multiple handsets, making it excellent for larger homes or office spaces. Depending on the model, some configurations come with three, four, or two handsets, ensuring flexibility and extending coverage throughout the premises.

Each phone is equipped with DECT 6.0 technology. This advanced digital technology enhances the clarity of calls and reduces interference from other wireless devices, ensuring a secure connection. Additionally, DECT 6.0 provides a longer range than earlier technologies, which allows users to stay connected even when moving away from the main base unit.

The CS6859 series features a large, backlit display that makes it easy to see caller ID information, menus, and settings, even in low-light conditions. This is complemented by a straightforward keypad layout, designed for intuitive navigation. Users can store frequently called numbers in the speed dial memory, providing quick access to important contacts.

Another notable characteristic is the series’ built-in answering system. Users can record messages and review them conveniently, allowing for missed calls to be addressed promptly. The voicemail indicator alerts users of new messages, ensuring they never miss an important communication.

Additionally, the CS6859 models incorporate an eco-friendly design, as they are equipped with energy-efficient power supplies that consume less energy during operation. The series is also compatible with headsets, providing hands-free communication for added convenience.

In terms of sound quality, the VTech CS6859 series ensures clear audio with adjustable volume levels to suit user preferences. Features such as call blocking help manage unwanted spam calls, contributing to a more peaceful home environment.

Overall, the VTech CS6859 series exemplifies an ideal balance of functionality and modern technology, making it a preferred choice for anyone seeking reliable cordless phone solutions. With its combination of advanced features, multiple handset options, and user-friendly design, it meets the communication needs of a variety of users, ensuring that connectivity remains seamless.
Top Page Image Contents