
��The PIN entered will be displayed as * symbols on the screen.
��If a base location is full there will be an
Telephone operation
Register a handset
Step 2: To display the telephone feature menu, press the Menu softkey from the main idle screen.
Step 3: Press the ,
,
and/or
NavKeys to choose Registration Settings then press the Select softkey or center NavKey/SEL/
.
Step 4: Press the up or down NavKey or
to choose Handset Settings then press the Select softkey or center NavKey/SEL/
.
Step 5: Press the up or down NavKey or
to choose Register to Base then press the Select softkey or center NavKey/SEL/
. A list of locations for assigning telephone bases will be displayed.
Step 6: Press the up or down NavKey or
to choose an empty location and press the Register softkey or center NavKey/SEL/
.
Step 7: The handset will display Searching while it searches for the telephone base. If the search is successful, a code from the telephone base will be displayed. To register the handset to the telephone base, press the Register softkey.
Step 8: In the Enter PIN box, enter the system PIN. The default PIN is 0000. Press the Apply softkey.
Step 9: Handset registered will be displayed when the registration process is complete. The screen will return to the registration settings menu. Press OFF to return to the idle screen.
This telephone has an intercom feature but you must own at least two handsets to use intercom (see page 87). Additional handset(s) can be purchased separately.
Registration Settings
Back | Select |
Register to base
Base1
Base2
Base3
Base4
Back | Register |
Register to base
Back | Register |
Register to base
**
43 | www.vtechphones.com |
Back | Apply |