
��The default system PIN is 0000.
��When you enter the PIN, the digits will display as * symbols on the screen.
��To register a handset to the base, see page 42.
Telephone operation
De-register handset
This menu allows you to
Step 1: Press the Menu softkey from the idle screen.
Step 2: Press the ,
,
and/or
NavKeys to choose Registration Settings, and press the Select softkey or center NavKey/SEL/
.
Step 3: Press the up or down NavKey or
to choose Base Settings
then press the Select softkey or center NavKey/SEL/.
Step 4: Press the up or down NavKey or
to choose
. The Enter PIN screen will be displayed.
Step 5: Use the dial pad to enter the PIN when prompted. Press the left or right NavKey or
to move the cursor to the right of the character you want to delete and press REDIAL/REMOVE to delete number if you make a mistake.
Step 6: Press the Apply softkey or center NavKey/SEL/ to confirm. The screen will display all the handset(s) registered to the telephone base.
Step 7: Press the up or down NavKey or
to choose the handset to
. The screen will display Handset successfully
Registration Settings
Handset Settings
Base Settings
Back | Select |
Base Setting
Change System PIN
Clear VMWI
Back | Select |
Enter PIN
Back | Apply |
Handset 1
Handset 2
Handset 3
Handset 4
45 | www.vtechphones.com |
Back | Select |