Intercom calling
Swap internal and external calls
While you are on an external call and you wish to intercom another handset without disconnecting the external call:
Step 1: While on a call, press the Options softkey.
Step 2: Press the up or down NavKey 
or 
to choose Internal call then press the Select softkey or center NavKey/SEL/
.
Step 3: Enter the destination handset number and the destination handset will ring. The originating handset will beep and the external call will be put on hold. To cancel the intercom call and return to the external call, press the Swap softkey.
Step 4: After the destination handset has answered the intercom call, Active will be displayed on the intercom connection window on the screen of the originating handset to show the call which is activated.
Step 5: Press the Options softkey on the originating handset. Press up or down NavKey 
or 
to choose Swap internal then press the Select softkey or center NavKey/SEL/
to swap between the internal and external call. Active will be shown on the screen to indicate the activated call and On Hold will be shown on the screen to indicate the call on hold.
Step 6: To end the intercom call without disconnecting the external call, press the Options softkey on the originating handset. Press the up or down NavKey 
or 
to choose Release internal then press the Select softkey or center NavKey/SEL/
to end the intercom call.
Step 7: To transfer the external call, press OFF on the originating handset while the external call is activated and the intercom call is on hold.
Incoming Call |
Int 2 |
00:01:55 |
Answer |
Intercom calling
www.vtechphones.com | 88 |