VTech CS6419-15 user manual Intercom, Other Handset is Calling when you have two

Telephone operation

Intercom

Use the intercom feature for conversations between two handsets. 1. Press INT on your handset when not in use.

• If you have two handsets, your handset shows

CALLING OTHER HANDSET.CALLING

OTHER HANDSET

• If you have three or more handsets, your handset
shows INTERCOM TO: Use the dialing keys to select a
destination handset. Your handset shows
CALLING HANDSET X.				OTHER HANDSET
The destination handset rings and its screen shows				IS CALLING
OTHER HANDSET IS CALLING when you have two
handsets, or HANDSET X IS CALLING when you have
three or more handsets.
			INTERCOM
2. To answer the intercom call, press /FLASH,		, INT
or any dialing key (0-9, TONE	or #) on the destination

handset. Both handsets now show INTERCOM.

3.To end an intercom call, press OFF/CANCEL or place the

handset back in the telephone base or charger. Both handsets now show

INTERCOM ENDED.

•You can cancel the intercom call before it is answered by pressing

OFF/CANCEL or INT on the originating handset.

•If the destination handset does not answer the intercom call within 100 seconds, is in the directory or call log, or is out of range, the originating handset shows UNABLE TO CALL. TRY AGAIN and returns to

idle mode.

•Press OFF/CANCEL or MUTE/DELETE on the destination handset to temporarily silence the intercom ringer.

•You can use two pairs of handsets on two intercom calls at a time. For example, you can use four handsets on two intercom calls and one handset on an outside call, or two handsets on an intercom call and two handsets on an outside call.

•If there is an incoming call while the originating handset shows INTERCOM TO:, the intercom request will be stopped and the screen will show INCOMING CALL.

20