VTech CS6419-15 user manual OUT of Range or no PWR AT Base shows in the handset screen

Page 49

Appendix

Troubleshooting

OUT OF RANGE OR NO PWR AT BASE shows in the handset screen.

The handset may be out of range. Move it closer to the telephone base.

Make sure the power cord is securely plugged into the telephone base. Use a working electrical outlet not controlled by a wall switch.

Reset your telephone by unplugging the power adapter from the telephone base. Disconnect the battery from the cordless handset. Wait for 15 seconds, then plug in the power adapter and reinstall the battery. Place the handset in the telephone base and allow up to one minute for the handset and telephone base to synchronize.

Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.

NEW VOICEMAIL and show on the display and I don’t know why.

If NEW VOICEMAIL and appear on the display, then your telephone has received a signal from your telephone service provider that you have a voicemail message waiting for you to retrieve from your telephone service provider. Contact your telephone service provider for more information on how to access your voicemail.

I subscribe to a nontraditional telephone service that uses my computer to establish connections, and my telephone doesn’t work.

Make sure your computer is powered on.

Make sure your Internet connection is working properly.

Make sure that the software is installed and running for your nontraditional telephone service.

Make sure to plug your USB telephone adapter into a dedicated USB port on your computer. Do not plug into a multiple port USB hub (USB splitter) that is not powered.

In a few rare instances, the USB port on your computer may not have enough power. In these instances, try using a USB hub with its own external power supply.

If you are using a firewall, it may prevent access to your nontraditional telephone service. Contact your service provider for more information.

45

Image 49
Contents Online user’s manual Congratulations Table of contents Index AppendixGetting started Parts checklistTelephone base and charger installation Charge light remains on when charging Battery installationBattery indicators Battery status Action Battery chargingLOW Battery ChargerTabletop to wall mount installation Installation optionsSee Telephone base and charger installation on Wall mount to tabletop installationUSE light Telephone base layoutCharge light Handset layoutFlash Dialing keys MENU/SELECTUsing the menu Telephone settingsRinger volume To enter the handset menuLCD language Ringer toneTo manually turn off these indicators Clear voicemail indicatorsKey tone Set date and time Home area code Dial modeTelephone operation Call waiting MuteTemporary ringer silencing Temporary tone dialingReview and dial a redial entry Redial listStore a number from the redial list to the directory Delete a redial entryTo access the call log while on a call To access the directory while on a callTo access the redial list while on a call Chain dialingFind handset Join a call in progressTo join a call To start the paging toneIntercom Other Handset is Calling when you have twoINT Answer an incoming call during an intercom call Call transfer using intercomFrom this intercom call, you have the following options About the directory DirectoryCreate a new directory entry Edit Number Alphabetical search Review the directoryDial a directory entry Edit a directory entryStore a speed dial entry Speed dialDelete a speed dial entry Dial a speed dial numberAbout caller ID Caller IDInformation about caller ID with call waiting Not Available AT this Time Call logMemory match Missed call indicatorReview and dial from the call log Save a call Iog entry to the directory View dialing optionsCall log display screen messages Delete from the call logTo delete one entry To delete all entriesHandset display screen messages AppendixTelephone number you have entered is already stored On when the handset speakerphone is in use Handset and telephone base indicatorsHandset lights Telephone base lightsBattery needs charging when BatteryAdd and register a handset optional Expand your telephone systemTo register a handset To deregister all handsets Replace a handsetMy telephone does not work at all TroubleshootingThere is no dial tone Cannot dial outTelephone does not ring when there is an incoming call LOW Battery shows on the handset screenCharge light is off My handset beeps and is not performing normally Hear noise on the cordless handset and the keys do not work Hear other calls when using the telephoneRegistration Failed appears on the handset Caller ID entries do not match the numbers I need to dial My caller ID features are not working properlyNEW Voicemail and show on the display and I don’t know why OUT of Range or no PWR AT Base shows in the handset screenCommon cure for electronic equipment Important safety instructions Operating range Precautions for users of implanted cardiac pacemakersPacemaker patients Avoid rough treatment MaintenanceRbrc seal About cordless telephonesWhat does this limited warranty cover? Limited warrantyHow long is the limited warranty period? What is not covered by this limited warranty?Other limitations How do you get warranty service?FCC Part FCC, Acta and IC regulationsFCC Part 68 and Acta Industry Canada Technical specifications Index Index
Related manuals
Manual 16 pages 26.48 Kb