Choosing your
base settings | pg28 |
| |
The BS SETTING menu lets you | ▼ AUDIO |
choose how your base station works |
|
▼ RINGER VOL | each press selects |
| a different volume |
pg29
You can
•set the base ringer volume
•choose the base ring melody
• bar external and intercom calls from | ▼ BS SETTING |
| |
being made – see page 4 |
|
• change your PIN |
|
•
•reset to the factory settings
•set your phone to wait for a dial tone after the access code on a PABX switchboard
✓Shows a current setting
Press to scroll through menus
Press to select the feature you want
Press and hold after
setting a feature to leave the BS SETTING menu
▼ CALL BARR
▼ CHANGE PIN |
|
▼ DEREG | See page 24 |
| |
▼ NETWK CODES | See page 35 |
| |
▼ RESET |
|
▼ PABX FUNCT |
|
▼ MELODY | each press selects |
| a different melody |
▼ ENTER PIN | choose off or on – if you bar calls, |
| |
| the display will say CALLS BARRED |
| |
| whenever you try to dial |
| |
▼ ENTER PIN | ▼ NEW PIN | ▼ REPEAT | |
enter your current PIN | enter your new PIN | ||
|
| to confirm |
|
▼ ENTER PIN | ▼ RESET? | doing this will |
|
|
| • empty the favourite | • set the base |
▼ NETW ACCESS |
| & quick dial lists | melody to 1 |
| • set the base | • empty the call log | |
enter the switchboard |
| ringer volume to 5 | • cancel call barring |
| • set the PIN to 0000 | • set network codes | |
access code |
| ||
4 Choosing your base settings
STORED
Confirms a setting you make
to BT