VTech Mirage A100 manual Setting up, Power lead, Pg7

Page 5

Setting up

What’s in this pack

•one Mirage handset

•one Mirage base station

•user guide

•power adapter

•telephone line cord

•two handset batteries

•two spare clip on covers

•two wall fitting screws and plugs

If any of these are missing, please return the complete pack to your retailer as soon as you can.

If you want to add more handsets, follow these instructions to set up your first handset and then follow the instructions on page ?? of your user guide.

Your handset must be charged for at least 24 hours before it’s ready for use.

Choose a good position for your phone. To improve reception, it should be:

•as high as possible – a second floor is best

•within three metres of the mains socket and phone socket so that you don’t have to use extension leads

•away from large metal objects like radiators, fridges or filing cabinets

•away from metal framed windows

•away from hidden metal pipes

•away from electrical equipment, such as a TV or microwave.

Reception may be poor if the building’s walls are very thick or metal framed.

This phone is not designed for making emergency telephone calls when the power fails. You should make alternative arrangements for calls to emergency services.

1Plug the power lead into the sockets on the bottom of the base station.

2Plug the adapter into a mains power socket and switch the power on.

clip the cords in here to stop the plugs from being pulled out

power lead

phone cord

3Fit the handset batteries – making sure they’re the correct way around.

The handset uses the two AA size NiMH (Nickel Metal Hydride) batteries supplied.

pg7

4Sit the handset on the base station and leave for the batteries to charge for at least 24 hours before you try to use your phone

The display will say SEARCHING and then switch to the stand-by display. There’s more detail about the display in your user guide.

It’s normal for the handset to get a little warm as it charges.

5

After the batteries have charged, plug the

 

 

phone cord into the base station and into a

 

 

phone socket. Only use the phone cord

up

 

supplied. Others may not work.

 

Setting

6

Your phone is now ready to use. Follow the

 

instructions in this guide.

1

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Mirage A100 Contents Warranty information SafetyIf you have a heart pace maker If you have a hearing aidInnovation Network servicesStyle SimplicityPg7 Setting upPower lead Pg8 Fixing your Mirage phone to a wallCheck Pg9Basic functions Section contentsStored VolumeAndy Cancel HS SettingsAudio HsetnameCall LOG NEW CallsDelete Delete ListEdit Using redialEditing a number on your redial list Deleting a redial numberKaren NameDialling a favourite number Deleting a favourite numberDialling a quick dial number QuickdialDeleting a quick dial number Storing or changing a quick dial numberAuto Redial Call AnonymInquiry Handset settings pg26 Enter PIN RESET? ResetNetw Access Call BarrNetwork services pg30 2Press Change Codes3Press Press several times until the display says Press Scroll to the code you want to setSingle Switch CallPTY Call Handsets pg36 Enter your PIN the factory setting is PressRegister Base aGroup Call INT/COM NBRINT/COM 3PTY Call INT/COM INQTransfer DEREG? Base stationsLetter shows Active base station De-registering a handset from a base stationThere’s no dial tone Select BaseThere’s no display on the handset My handset doesn’t ringCannot make intercom calls Battery icon shows a low chargeCan hear the caller but they can’t hear me Have spilt liquid on my handsetDispaly says Same PIN Handset flashes RegisterHandset seems to be locked BatteriesBase station Display
Top Page Image Contents