VTech Mirage A100 manual HS Settings, Audio, Hsetname, Keyguard, Activate?, Cancel

Page 9

pg14	Basic functions

Changing the handset name

You can choose any name – up to 8 characters – for the handset, such as a room or person’s name.

1	1 LOUNGE
	1 LOUNGE
2	Press
3	Press several times until the
	display says

HS SETTINGS

4Press

▼AUDIO

5	Press several times until the
	display says

HSETNAME

6

7

8

9

10

Press The display shows the current name

Press and hold until the current name is deleted

Use the keypad to enter the new name

Press to confirm the new name

Press and hold to return to the stand-by display

Entering letters

Each key selects several letters.

Press a key repeatedly to choose the letters on it. If the letter you need is on the same key, wait about four seconds between presses.

If you make a mistake, press C. Press 0 for a space.

1

2

3

4

5

Switching the keyguard on

The keyguard stops your phone

1

accidentally dialling numbers while in a pocket or bag and stops young children dialling too. It does not stop emergency calls.

1 LOUNGE

Press

Press several times until the display says

KEYGUARD

Press

ACTIVATE?

Press

The display shows

CANCEL 159

pg15

Switching the keyguard off

Key 159 before you dial

You’ll need to switch the keyguard back on again when you’ve finished.

2 Basic functions

Image 9

Contents Mirage A100 Contents Warranty information SafetyIf you have a heart pace maker If you have a hearing aidInnovation Network servicesStyle SimplicitySetting up Power leadPg7 Pg8 Fixing your Mirage phone to a wall Check Pg9Basic functions Section contentsVolume AndyStored Cancel HS SettingsAudio HsetnameCall LOG NEW CallsDelete Delete ListEdit Using redialEditing a number on your redial list Deleting a redial numberKaren NameDialling a favourite number Deleting a favourite numberDialling a quick dial number QuickdialDeleting a quick dial number Storing or changing a quick dial numberCall Anonym InquiryAuto Redial Handset settings pg26 Enter PIN RESET? ResetNetw Access Call BarrNetwork services pg30 2Press Change Codes3Press Press several times until the display says Press Scroll to the code you want to setSwitch Call PTY CallSingle Handsets pg36 Enter your PIN the factory setting is PressRegister Base aINT/COM NBR INT/COMGroup Call INT/COM INQ Transfer3PTY Call DEREG? Base stationsLetter shows Active base station De-registering a handset from a base stationThere’s no dial tone Select BaseThere’s no display on the handset My handset doesn’t ringCannot make intercom calls Battery icon shows a low chargeCan hear the caller but they can’t hear me Have spilt liquid on my handsetDispaly says Same PIN Handset flashes RegisterHandset seems to be locked BatteriesBase station Display