Troubleshooting
Problem | Suggestion | |
|
|
|
I cannot dial out.. | • | First, try all the above suggestions.. |
| • Make sure there is a dial tone before dialing.. It is normal if the cordless handset takes a second | |
|
| or two to synchronize with the telephone base before producing a dial tone.. Wait an extra |
|
| second before dialing.. |
| • Make sure the telephone is set to the correct dial mode (pulse dial or tone dial) for the service | |
|
| in your area.. Refer to the Dial mode section of this user’s manual (page 12) to set the dial |
|
| mode.. |
| • If the other telephones in your home are having the same problem, the problem is in the wiring | |
|
| or local service.. Contact your local telephone company (charges may apply).. |
| • Eliminate any background noise.. Noise from a television, radio, or other appliances may cause | |
|
| the telephone not to dial out properly. If you cannot eliminate the background noise, first try |
|
| muting the cordless handset before dialing, or dialing from another room in your home with |
|
| less background noise.. |
|
|
|
My cordless handset | • | Make sure the power cord is securely plugged into the telephone base.. Plug the unit into a |
beeps five times |
| different electrical outlet not controlled by a wall switch.. |
and not performing | • | Move the cordless handset closer to the telephone base.. It might be out of range.. |
normally.. | • | Reset the telephone base by unplugging the unit’s electrical power.. Wait for 15 seconds and plug |
| ||
|
| it back in again.. Allow up to one minute for the handset and telephone base to synchronize.. |
| • | Other electronic products can cause interference to your cordless telephone.. Try installing |
|
| your telephone as far away from these electronic devices as possible: wireless routers, radios, |
|
| radio towers, pager towers, cellular telephones, intercoms, room monitors, televisions, personal |
|
| computers, kitchen appliances and other cordless telephones.. |
30 | www.vtechphones.com |