VTech gz5838 important safety instructions Battery

Page 36

Battery

After the battery is fully charged for 16 hours, you can expect the following performance:

Operation	Operating time

While in use (talking)	5 hours

While not in use (standby*)	5 days

*Handset is off the telephone base but not in use..

The battery needs charging when:

•A new battery is installed in the handset..

•LOW BATTERY is displayed on the handset screen..

CAUTION:

1.Use only the supplied battery (part number 80-5074-00-00) or equivalent.. To order a replacement, visit our website at www..vtechphones..com or call 1 (800) 595-9511.. In Canada, visit www..vtechcanada..com or call 1 (800) 267-7377..

2.Do not dispose of the battery in a fire. Check with local waste management codes for special disposal instructions.

3.Do not open or mutilate the battery(ies).. Released electrolyte is corrosive and may cause burns or injury to the eyes or skin.. The electrolyte may be toxic if swallowed..

4.Exercise care in handling batteries in order not to create a short circuit by letting them come into contact with conductive materials such as rings, bracelets, and keys.. The battery and/or conductor may overheat and cause burns..

5.Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO WATER OR ANY TYPE OF MOISTURE..

36	www.vtechphones.com

Image 36

Contents Table of contents Page Important safety instructions CongratulationsParts checklist Before you beginInstallation Installing handset batteryTelephone base installation To single-lineTelephone jack RJ11C Telephone line cord DSL filter Optional for DSL usersRemovable handset bracket and telephone base plate Handset bracketHandset features CIDTelephone base features CHARGE/IN USETelephone operation Make, answer, and end a callCall waiting Set handset ringer Dial mode Set date and timeTemporary tone dialing LanguageDisplay screen messages Speed dial Store a speed dial entrySpeed dial Edit a speed dial entry Delete a speed dial numberDial a speed dial number Re-assign speed dial locationsDirectory Store a directory entryDirectory Edit a directory entry Delete a directory entry Move a directory entry to speed dial Caller ID About caller ID informationCall log Review call logRemove records from call history Dial a displayed numberLocate the desired record in the call log Various dialing options areStore a call log entry in the directory Call log display screen messages Display WhenHeadset operation Belt clipTroubleshooting Contact your local telephone companyCannot dial out First, try all the above suggestions Second before dialingMode Less background noiseLow Battery is Using the telephone Hear other calls whileHear noise Cordless handset, None of the keys or Buttons workRing when there is an Incoming callBase Simultaneously.. Try unplugging some of themThere is noise Or interferenceSame outlet or near a microwave oven Telephone company charges may applyCaller ID service During call waiting Caller ID serviceNot receive caller ID Company Or the system does Not display caller IDBattery Important safety instructions Maintenance WarrantyWhat is not covered by this limited warranty? Operating range FCC, Acta and IC regulationsFCC, Acta and IC regulations Rbrc Seal Technical specifications Index DSLTelephone base features 91-001083-010-100 User’s manual