Appendix
Screen icons and indicator lights
Appendix
Adding new handsets
Handset screen icons
Telephone line
Internet line
MUTE NEW
Intercom
Low battery (place handset in base or charger to recharge)
Dial pad locked (to unlock, select MENU then press *)
MUTE Microphone is muted (select MUTE to resume conversation)
NEW New calls (press CID to review call log)
Status symbols for Internet calls
Online/SkypeMe
?Away/Status Unknown
XNot Available/Do Not Disturb/Invisible/Offline
Indicator lights
INTERNET LINE | TELEPHONE LINE |
On when Internet line is in use. | On when telephone line is in use. |
Flashes slowly when call is on hold. | Flashes slowly when call is on hold. |
Flashes quickly when line is ringing. | Flashes quickly when line is ringing. |
NOT REGISTERED
MENU
Press MENU to begin
1 > REGISTER
2DEREGISTER
OK
SEARCH BASE
HANDSET NAME
PAT_
OK
PAT
INTERCM MENU
Your telephone can accommodate up to 4 cordless handsets. You can add new handsets (sold separately) at any time.
Before using a new handset, you must first install and charge the batteries for 15 hours (see page 7).
After the batteries are fully charged, follow the pro- cedure below to register the handset to the base.
1Select MENU.
2Highlight "Register," then select OK. The screen will display, "Search Base".
3Press and hold the LOCATE HANDSET button on the base for at least 30 seconds.
4The handset should beep to indicate the registra- tion has completed. You will be prompted to enter a name for the new handset (see page 17 for help in entering names). We strongly recommend that you give each handset a distinctive name, to simplify paging and intercom use.
5Select OK to save the new handset name. The name you enter will be displayed on screen when the handset is idle, and in intercom paging lists.
If the above procedure does not work, see page 29 for further suggestions.
24 | 25 |