Nuisance Channel Delete
Nuisance Channel Delete allows you to temporarily remove channels from the Scan List. This feature is useful when irrelevant conversations on a ‘nuisance’ channel ties up the radio’s scanning feature.
To delete a channel from the Scan List:
•Start Scan mode by short pressing the SB1 or SB2 (programmed for scan) button.
•Wait until the radio stops at the channel you wish to eliminate. Long press the SB2 button to delete it. You cannot delete the channel with scan enabled (home channel).
•The channel will not be scanned again until you exit the Scan mode by short pressing the SB1 or SB2 (programmed for scan) button again or by turning OFF the radio and back ON.
CUSTOMER PROGRAMMING SOFTWARE |
|
|
(CPS) |
| PROGRAMMING |
Radio to be |
| |
programmed |
|
|
USB Ports |
| FEATURES |
CPS Programming Cable |
| |
|
| |
|
| |
Figure 1: Setting up the radio to the CPS |
|
|
The easiest way to program or change features |
| |
in your radio is by using the Customer |
|
|
Programming Software (CPS) and the CPS |
|
|
Programming Cable(*). CPS Software is |
|
|
available for free as web based downloadable |
|
|
software at: |
|
|
www.motorolasolutions.com/RMseries |
|
|
41 | English | |
| ||