PROGRAMMING FEATURES
simultaneously while turning the radio ON.
•Wait for 3 seconds before releasing the buttons until the audible tone “Cloning” is heard.
3.Place the Source radio in the source pocket that pairs with the target pocket you chose in step 1. Press and release the SB1 button.
4.After cloning is completed, the Source radio will announce either “successful” (cloning is successful) or “fail” (cloning has failed). If the Source radio is a display model, it will either show ‘Pass’ or ‘Fail’ on the display (a voice announcement will be played within 5 seconds).
5.Once you have completed the cloning process, turn the radios OFF and ON or, long press the PTT button to exit the ‘cloning’ mode.
Further details on how to clone radios are explained in the Instructions Sheet provided with the MUC.
When ordering the MUC, refer to P/N# PMLN6384_.
Notes:
•If cloning fails, refer to “What To Do If Cloning Fails” on page 51.
•Paired Target radios and Source radios must be of the same band type in order for the cloning to run successfully.
•MUC pockets numbers should be read from left to right with the Motorola logo facing front.
English 48